Adding The Rc8025B-Adt To The Adt Pulse Wireless System - ADT RC8025B- Installation Manual

IMPORTANT
During start up, the Power LED displays for approximately 10 to
15 seconds. When installation is complete, the Power LED and
the Network LED remain ON.
NOTE:
Adding the RC8025B-ADT to the ADT Pulse Wireless
System
1. Open your web browser. In the address bar, type:
https://Portal.ADTPulse.com.
2. Type your Username and Password, and then click the Sign In button.
3. Click the System tab, and then click the Manage Devices button.
ADT Pulse Interactive Solutions
®
RC8025B-ADT Wireless Day/Night Camera Installation Guide
DO NOT USE ANY POWER ADAPTER OTHER THAN
THE ONE SPECIFIED. DOING SO MAY DAMAGE THE
DEVICE.
7