Healthrider HRIVEX87314.0 User Manual page 6

STEP 1
Install the Front bottom tube (2) and
Rear bottom tube (3) to the Main
frame (1) with 4pcs the Hex screw
(13), 4pcs Spring washer (14) and
4pcs Arc washer (15).
STEP 2
Attach the Pedal(18) on the Crank(17) with
wrench.
Please note: secure the left pedal in a clockwise
direction and secure the right pedal in a coun-
ter-clockwise direction as the following picture.
Then make sure the Pedal(18) are tighten, oth-
erwise, they will be broken.
STEP 3
A: Attach the Protective guard (23) on the
Handlebar post(4).Then connect the Sensor
wire(21) with Extension wire(22) properly.
B: Lock the Handlebar post(4) onto the Main
frame(1) with 2pcsHex screw(19), 2pcs Spring
washer(14) and 2pcs Flat washer(7),then cover
the Protective guard(23) tightly.
6