Timer Recording From Channel Information; Notes On Timer Recording - Panasonic Diga DMR-BCT820 Operating Instructions Manual

Timer recording from channel
information
You can make timer recording of the current or
next programme.
1
While watching a programme
Press [STATUS
e.g.,
NEWS
1
9:00 - 11:00
Now
Dolby D
2
Display the channel information of a
programme to record.
• Switch the programme with [2, 1].
• Switch the channel with [3, 4].
3
Press the yellow button.
4
Go to step 3 on page 36.
].
10:30
All DVB Channels
Set timer Change category

Notes on timer recording

• You can enter up to 32 programmes within a
month in advance. (Each daily or weekly
programme is counted as one programme.)
• When the programme recorded in DR mode is
converted, the audio content and subtitle
language will be selected according to the
following settings:
- "Multi Audio" of "Preferred Language" (
- "Subtitles" of "Preferred Language" (
- Audio for HG / HX / HE / HL / HM Recording
( 95)
• When the programme recorded in DR mode is
converted, teletext will not be recorded.
• Data service will not be recorded.
• (Only when recording broadcast in other than
DR mode)
This unit will record in the DR mode once, and
then convert to the selected mode automatically
during standby. If the title has not been
decrypted, conversion will start after decryption.
• Even if you switch the unit to standby mode
during the timer recording, the recording is
continued.
• When you programme successive timer
recordings to start, about last 1 minute of earlier
programme will not be recorded.
• Timer recording will not start while:
- copying a title in high speed mode [with
finalising or creating Top Menu ([+RW])]
- copying a title in normal speed mode
- converting a title in "File Conversion" (Only
when "Now" is selected)
- copying HD Video (AVCHD) from USB device
or SD card
- copying photos/music
- formatting
- finalising/creating Top Menu
Recording
90)
90)
37
VQT4G51