Connecting An Active Subwoofer (Optional); Recording To Mds Or Cassette Tapes - Panasonic DVD-RV21 Operating Instructions Manual

VIDEO S VIDEO
AUDIO CUT OUT ET
(Red) (White)
7
Í audio cable
(Red) (White)
OL
eR
insert fully, with
this side facing
AUX IN
Amplifier or system component
eSelect "2-channel" (= page 22).
Adjust the settings to suit the equipment you have con-
eSelect "No" in "PCM Down Conversion" (* page 26). nected (= page 26).
To enjoy Dolby Pro Logic
elf you connect an amplifier with a Dolby Pro Logic decoder, you will also need to connect center and surround speakers to enjoy
surround sound. Read the instructions for the equipment for connection details.
Home Theate a
eTurn Advanced Surround and Bass Plus off ( page 14). The Dolby Pro Logic decoder will not function correctly if Advanced Surround
or Bass Plus is on.
Connecting an active subwoofer (optional)
You can enjoy more powerful bass by connecting an active subwoofer.
ePlace the subwoofer as close as possible to the front center.
. eTurn BASS PLUS on to boost the output from the subwoofer
Audio cable CUL
EE (= page 14).
eAdjust the volume on the subwoofer to suit your preference.
OPTICAL
To the subwoofer's —<LI>—
input terminal
Recording to MDs or cassette tapes
. You can record the digital signal directly onto an MD.
B Analogrecording
You can record to an MD or cassette tape. The signals on DVDs will be converted to 48 kHz/16 bit linear PCM.
Using analog connection means sound will be unaffected by the Ensure the following conditions are met. —
copy guards found on DVDs. eThere is no copy guard recorded on the disc.
eThe recording equipment can handle a sampling frequency of
To make an analog recording 48 kHz/16 bit.
1. Connect the recording equipment with an audio cable (= y f
above).
To make a digital recording
; 1. Connect the recording equipment with an optical digital audio
cable (= [5] above).
2. When recording DVDs, change the digital audio output settings
(= page 26).
PCM Down Conversion: Yes
Dolby Digital: PCM
DTS Digital Surround: Off 29
RQT5733
[DY
2. Set "Speaker Setting" to "2-channel" (= page 22).
(If this is set to "Multi-channel", only the audio for the front 2
speakers will be recorded.)