To Confirm And Edit A Timer Programme - Panasonic Diga DMR-BCT820 Operating Instructions Manual

Recording
Timer recording
To confirm and edit a timer
programme
1
Press [PROG/CHECK].
e.g.,
Timer Recording HDD
Channel Name
New Timer Programme
Total 3/32
OK
Turn
RETURN
Timer Off
2
Select the programme, then perform the
operations.
To deactivate a timer programme
Press the red button.
• The timer icon "F" will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon "F" will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to "Timer recording options".
( 36)
3 Press [OK].
To show programme information
Press [STATUS
To exit the timer recording list
Press [EXIT ].
38
VQT4G51
30:30 DR SUN 01.01.2012 8:05
Space
Schedule Mode
SAT 07.01
OK
DR
11:00 - 11:45
SAT 07.01
OK
HG
10:00 - 11:50
SAT 07.01
DR
11:30 - 1:00
SUN 01.01
DR
8:00 - 10:45
Delete Info
Page Up
Page Down
].
Screen icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[ Currently recording programme
A part or all of the programme will not be
recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set (
Displayed if timer recording of two
encrypted programmes is overlapping
(When "Recording for Encrypted Channel"
is set to "Decrypt Recording" only)
A part or all of the programme will not be
recorded since the encrypted programme
is overlapping.
OK
Displayed if the recording can fit in the
remaining space
Daily or weekly timer programme is set.
(Date)
!
It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (
- programmes are deactivated, etc.
36).
117)