Bobbin Winding - Viking H|Class 500E User Manual

BOBBIN WINDING

1. Place a spool of thread on the spool pin, and secure
it with the spool pin cap. Pull the thread out from the
spool through thread guide as illustrated.
2. Pull the thread end through the hole in the bobbin as
shown.
3. Push bobbin winder to the far left position. Place the
bobbin onto the bobbin winder with end of the thread
coming up from top of the bobbin. Push the bobbin
winder to the right until it clicks. Hold onto the thread
end.
4. Start the machine by pressing the foot control. The
bobbin winding stops automatically when the bobbin is
full. Push the bobbin winder to the left to remove the
bobbin and cut thread.
~ 14 ~