Viking H|Class 500E User Manual page 52

Will the Density of a Design
be Adjusted when Resizing It?
When sizing designs in the software you can resize designs
from the Library in the hoop on screen and keep the design
density. All other formats should be changed in the DESIGN/
CHANGE SIZE menu in order to change the stitch count.
Resizing Individual Letters
You can resize individual letters after you have brought them
into the hoop and exit the text window. Left click, drag a box
around the desired letter, and size accordingly. Because the
letters are built-in, the letter will keep the appropriate density.
Deleting Part of a Design
Left click and drag a box around the desired area. To select
additional areas, hold down the CONTROL key and left click
on next area. Once selected, touch the DELETE key on your
keyboard.
Is there a Way to Increase the Density of the Lettering?
The density is set to a standard value of 4/10th of mm, which
is usually the standard density used for Lettering. The value is
not editable.
Why Does a Design Sometimes Split up Into
Very Small Segments? A Color Block Can
End up 'Divided' into Several Blocks.
The machine has a certain limit of stitches that it can accept. So
what most probably happens is that these are large blocks that
are cut after exceeding the limit, leaving a certain number of
stitches (could possibly be only a few) as a separate block.
When Sending the Whole Design at Once Through the
Option "Send Design" in the Machine Navigator,
1. Block numbers are indicated in the control panel as
illustrated.
2. If you want to select a block, push the numerical selection
button while the machine is not running.
Note: It is not possible to return to previous numbers.
~ 50 ~