Viking H|Class 500E User Manual page 35

BUTTONHOLE
Using the Buttonhole Foot
1. Insert a button in between tab A and tab B.
2. Buttonholes can be sewn to match the size of the
button.
Procedure
• Use stabilizer in the area of the garment where the
buttonholes are placed. Stabilizer or regular interfacing
can be used.
• Make a practice buttonhole on a scrap of the fabric you
are using. Then try the buttonhole with the selected
button.
1. Select one of the buttonholes, 94, 95, 96, 97, 98 or 99.
2. Attach the buttonhole foot.
3. Insert the button into the buttonhole foot.
4. Set the buttonhole lever (C) so that it drops down
vertically between the stoppers (A) and (B).
Tab A
C
A
C
Tab B
B
Buttonhole foot
C C
4. Sewing ~ 33 ~