Motorola Netopia 7000 Administrator's Handbook page 69

The IP Subnets screen allows you to configure up to seven secondary subnets and their DHCP
ranges, by entering IP address/subnet mask pairs:
Note:
You need not use this screen if you have only a single Ethernet IP subnet.
This screen displays seven rows of editable columns. All seven row labels are always visible, regard-
less of the number of subnets configured.
K To add an IP subnet, select one of the rows, and click the
Ranges cannot overlap and there may be only one range per subnet.
Submit
K Click the button.
To delete a configured subnet, set both the IP address and subnet mask values to 0.0.0.0, either
explicitly or by clearing each field and clicking the
NOTE:
All additional DHCP ranges use the global lease period value. See
Edit
button.
Check the Enabled checkbox and click the
ton.
The screen expands to allow you to enter subnet infor-
mation.
If DHCP Server (see
not enabled, the DHCP Start Address and DHCP End
Address fields do not appear.
KEnter the Router's IP address on the subnet in the IP
Address field and the subnet mask for the subnet in
the Netmask field.
KEnter the DHCP Start Address and End Address of
the subnet range in their respective fields.
Submit
button to commit the change.
Submit
"DHCP Server" on page
page 68.
but-
68) is
69