How To Select Input, Output Data; Input Data - Furuno GP-1670F Operator's Manual

10.4

How to Select Input, Output Data

Select the data to receive and output. Before selecting data to output, confirm what
data the external equipment requires. Output necessary data only. Outputting unnec-
essary data can cause receiving problems at the external equipment.
10.4.1

Input data

Open the [[INTERFACE] menu and select [SELECT INPUT DEVICE].
Select the item to process then push the RotoKey
ing on your selection.
[POSITION & SOG/COG]
[DEPTH], [WATER TEM-
PERATURE] and [SPEED
THROUGH WATER]
Other items
Internal GPS
Fish Finder
Fish Finder
Fish Finder
Scroll
Item
[Internal GPS]: Use the internal GPS navigator.
[Auto]: Select if you have multiple navigators connected
and you want to use them instead of the internal GPS
navigator. If the external source is a FURUNO make, its
name appears below [Auto]. Select it to have that device
feed respective data.
[Fish Finder]: Select to have the internal fish finder feed
respective data.
[Auto]: Select when multiple external sources are avail-
able and you want to use them instead of the internal fish
finder. In this case, the device with the lowest IP address
has priority. If the external source is a FURUNO make, its
name appears below [Auto]. Select it to have that device
feed respective data.
Select [Auto] in case of multiple sources, or the FURUNO
device name that appears below [Auto], if a FURUNO de-
vice is connected.
10. OTHER FUNCTIONS
TM
. Do one of the following depend-
Options
10-5