Audio Alarm Conditions; Arrival Alarm - Furuno GP-1670F Operator's Manual

8. ALARMS
8.2

Audio Alarm Conditions

The audio alarm can be enabled or disabled and the alarm interval selected.
1. Open the [ALARMS] menu then select [AUDIBLE ALARM].
2. Select [Off] or [On] as appropriate.
3. Select [INTERVAL].
4. Select the alarm interval desired, among [Short] or [Long].
5. Press the ESC/MENU key to close the menu.
8.3

Arrival Alarm

The arrival alarm informs you that your boat is approaching a destination waypoint.
The area that defines an arrival zone is that of an imaginary circle which you approach
from outside the circle. The alarms will be released if your boat enters the imaginary
circle. You must set a destination to use this alarm.
Own ship
: Alarm area
To set the arrival alarm:
1. Open the [ALARMS] menu then select [ARRIVAL ALARM].
2. Confirm that the cursor is selecting the top line then push the RotoKey
3. Select [On].
4. Set the alarm value at [Distance].
5. Press the ESC/MENU key to close the menu.
8-2
Alarm range
Destination waypoint
TM
.