Edimax 10-2011 User Manual page 88

Address
New
Edit
Delete
Sender E‐Mail
Address
SMTP Server
SMTP port
SMTP Auth
SMTP
Account
Click this button and you'll be prompted to
input the email address. Click 'OK' to save
changes.
Select an email address from 'Recipient E‐Mail
Address' box, and click 'Edit' to edit the email
address.
Delete selected email address.
Specify the email address of email sender.
Specify the IP address or host name of the
SMTP server you wish to use. For most of ISPs
they will only allow its subscriber to use their
SMTP server, if you don't know which SMTP
server you should use, please refer to the
setting of your email software or ask your ISP
/ network administrator.
Specify the port number of the SMTP server
you wish to use here. By default (and the
setting of most of SMTP servers) it's '25'.
Select 'Enable' if your SMTP server requires
authentication, select 'Disable' if it's not
required. If you don't know if your SMTP
server requires authentication, please refer to
the setting of your email software or ask your
ISP / network administrator.
Input the SMTP account (username) of your
SMTP server here. In most cases, it's the same
with your POP3 username (the one you used
87