Path
Passive mode
Click 'Apply' button to save changes you made. You can also click 'Send a test
file' button to upload a test file to FTP server, and a message box will appear to
indicate if the FTP upload is successful, so you can examine if the parameters
you set in this page are correct.
5.1.3 SMTP
You can send a snapshot picture by E‐Mail when motion detected by this IP
camera.
Please don't change this value until
instructed by FTP server's administrator.
Input the path (folder) you wish to save
snapshot file on FTP server. If you don't
want to specify folder, you can leave this
field blank, and snapshot files will be saved
in the default folder when logged onto FTP
server.
Default setting is 'Enable' (use passive
mode). If the FTP server you're going to
use does not support passive mode (using
active mode), select 'Disable' here.
46