Edimax 10-2011 User Manual page 78

Model
IP*
Username*
Web Port*
Password
Video
Format**
Reset
OK
Cancel
*: It's recommended to use 'Select' button to fill the content of this field.
**: Only available for cameras support this function.
After you've set all channels you wish to set, click 'OK' to save settings, and if
everything's correct, you'll see the camera's image in IP camera surveillance
software's main menu:
is the first 6 bytes of camera's MAC address,
you can change the name of camera so you
can remember the camera's location of
purpose easily.
Displays the model of selected camera, this
field can not be changed.
Input the IP address of camera.
Input the user name of camera.
Input the web port of the camera. By default
it's '80'.
Input the password of camera. Default value is
'1234'. You should change the password if you
changed the password of selected camera.
Select the video encoding format of this
camera (MJPEG or MPEG4).
Clear all fields in 'Camera Configuration'
section.
Save settings in this tab.
Discard all settings in this tab.
77