IMPORTANT:
• Refer to Image Converter Operation Guide (or Manual) included in the supplied CD-ROM.
• Still images (pictures) should have <jcl>, and animations (movies) should have <jca> as their
extension code in their file names.
• Before you download or delete the files, observe the following:
– Do not download a file while driving.
– Do not turn off the ignition key of the car while downloading or deleting a file.*
– Do not detach the control panel while downloading or deleting a file.*
* If you do it, the file download or deletion will not be done correctly.
Downloading the files
Download an animation (consisting of 55
frames maximum) or pictures (total of 18 still
images: each one frame—see also page 61)
which can be used for the graphic screen.
• It takes a long time to download an animation.
For details, see page 61.
• To activate the downloaded files, see page 36.
1
Repeat steps 1 to 6 on page 32 (in step 6
select "Download").
• Downloading is only possible when the
source is "CD." If any source other than
"CD" is selected, "Download" will not be
shown as a PICT Menu item.
2
Select the file type—either "Picture"
<jcl> or "Movie" <jca>.
The folder list appears.
• Only the folders including the selected
file type <jcl> or <jca> are shown.
OK
BAND
then
3
Select (highlight) a folder where the file
you want is located.
• If a disc includes more than 6 folders,
you can also display the other lists of
folders by pressing 4/¢ ( / ).
The file list appears.
4
Select (highlight) a file to download.
• If the folder includes more than 6 files,
you can also display the other lists of files
by pressing 4/¢ ( / ).
The confirmation screen appears.
OK
BAND
then
OK
BAND
then
To be continued...
33