Downloading The Files - JVC KD-SHX900C Instructions Manual

IMPORTANT:
• Refer to Image Converter Operation Guide (or Manual) included in the supplied CD-ROM.
• Still images (pictures) should have <jcl>, and animations (movies) should have <jca> as their
extension code in their file names.
• Before you download or delete the files, observe the following:
– Do not download a file while driving.
– Do not turn off the ignition key of the car while downloading or deleting a file.*
– Do not detach the control panel while downloading or deleting a file.*
* If you do it, the file download or deletion will not be done correctly.
Note: The picture quality of the downloaded animation (movie) file may decrease when it is
shown on the receiver's display (compared to its quality on the PC).

Downloading the files

Download an animation (consisting of 55
frames maximum) or pictures (total of 18 still
images: each one frame—see also page 49)
which can be used for the graphic screen.
• It takes a long time to download an animation.
For details, see page 49.
• To activate the downloaded files, see page 33.
1
Repeat steps 1 to 6 on page 29 (in step 6
select "Download").
• Downloading is only possible when the
source is "CD." If any source other than
"CD" is selected, "Download" will not be
shown as a PICT Menu item.
2
Select the file type—either "Picture"
<jcl> or "Movie" <jca>.
30
OK
BAND
then
The folder list appears.
• Only the folders including the selected
file type <jcl> or <jca> are shown.
3
Select (highlight) a folder where the file
you want is located.
• If a disc includes more than 6 folders,
you can also display the other lists of
folders by pressing 4/¢ ( / ).
The file list appears.
OK
BAND
then