Using The Standby Reception - JVC CD Receiver KD-SHX701 Instructions Manual

To store your favorite programme types
in the Preset PTY Code List
When shipped from the factory, the following
6 programme types have been stored in the
Preset PTY List.
1
Pop M
4
Classics
1
While listening to a station...
Hold
TP/PTY
2
Select "PTYMemory."
3
Enter the PTY Memory setting screen.
OK
BAND
4
Select the preset number.
5
Select a PTY code.
16
3
2
Rock M Easy M
6
5
Affairs Varied
6
Store the setting.
OK
BAND
7
Repeat Steps 4 to 6 to store other PTY
codes into other preset numbers.
8
Exit from the Preset Memory setting.
BACK
DISP

Using the Standby Reception

You can use two types of Standby Reception—
TA Standby Reception and PTY Standby
Reception.
Using TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA)
from any source other than AM.
• If a station starts broadcasting a traffic
announcement, "Traffic News" appears on
the display, and this unit temporarily tunes in
to the station. The volume changes to the
preset TA volume level (see page 40).
To activate TA Standby Reception:
TP/PTY
TP indicator
(either lights up or flashes)
• If the TP indicator lights up, TA Standby
Reception is activated.