Kingxxel Tools Co M1E-LD-115 Operator's Manual page 5

Personal safety
 Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while operating power tools may result
in serious personal injury.
 The operation of any power tool can result in foreign objects being thrown into your
eyes, which can result in severe eye damage. Before beginning tool operation, always
wear safety goggles or safety glasses with side shields and a full-face shield when
needed. We recommend the use of a Wide Vision Safety Mask for use over glasses, or
standard glasses with side shields. Always wear eye protection, which conforms to
ANSI Z87.1. To prevent the risk of injury, you must also wear non-slip safety shoes,
hardhat, earmuffs and dust mask when required.
 Do not wear loose clothing or jewellery when operating the tool, as they could become
caught in the moving parts. If you have long hair keep it tied back above shoulder
height.

To prevent unintentional starting of the tool, ensure the safety switch is in the off-
position before connecting it to the mains power supply, or when picking up or carrying
the tool. Never carry the power tool with your finger on the power trigger.

Remove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.

To maintain full control of the tool, keep a proper footing at all times with your weight
evenly balanced over both feet and never overreach.

To maintain full control of the tool, keep the handle dry, clean and free from oil and
grease.
Power tool use and care

Do not force the power tool to do jobs for which it was not intended. The correct power
tool will do the job better and safer at the rate for which it was designed.

Do not use the power tool if the power switch is faulty. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.

To prevent the risk of accidentally starting the tool, make sure the tool is disconnected
from the mains power supply before making any adjustments, changing accessories,
or storing the tool.

Power tools are dangerous in the hands of untrained users. When not in use store the
tool out of the reach of children, and do not allow persons unfamiliar with the tool (or
these instructions) to operate it.

To prevent the risk of accidents, periodically check the tool for misalignment, binding of
moving parts, breakage of parts and any other condition that may affect the operation
of the power tool. If the tool is damaged in any way, take it to your local hardware store
for repair.

Keep cutting tools clean and sharp. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.

Use the power tool and accessories in accordance with these instructions, taking into
account the working conditions, and the work to be performed. Use of the power tool
for jobs for which it was not intended could result in injury.
5