Table of Contents
Advertisement
Removing the wheels:
Remove the wheels in the exact reverse order in which they were fitted.
2. Fitting/Removing the telescopic handle (Grass shear only) (Fig.5-8)
The telescopic handle is designed only for use with the grass shear blade at
ground level. Do not use the telescopic handle with the shrub shear or above ground level.
Fig.5
The telescopic handle can be mounted in 90º steps from 90º to -90º to get the desired
angle.(Fig.5-6)
Fitting the telescopic handle:
1) Guide the handle at the desired angle into the wheel holder until the lock
engages.(Fig.5-6)
2) Align the grooves on the machine with fixing on the wheel cart.(Fig.7)
3) Plug in the handle connector (9) (Fig.8)
Fig.8
Removing the telescopic handle:
1) Unplug the handle connector (9)
2) To release the machine from wheel cart, pull the machine in the direction shown on
Fig. 8
Fig.6
16
Fig.7
Advertisement
Table of Contents
