Table of Contents
Advertisement
The telescopic handle is designed only for use with the grass shear blade at
ground level. Do not use the telescopic handle with the shrub shear or above ground level.
After use replace the blade guard.
Tips:
Do not force the unit through dense growth, and if the blades slow down, reduce your
speed.
Avoid trimming too close to dirt, sand or gravel, as this could dull the blades and
reduce the cutting efficiency.
Do not allow the blade to contact paved surfaces, stones or garden walls, as this will
rapidly wear down the blade.
Wear gloves when changing blades.
Blades can cause injury. Do not press the safety lock of the shear during blade
changes.
Removing (Fig. 14-17)
Slide your thumb under the SDS blade changing release switch (8) and then slide the
cover (7) away from the housing as shown in Fig. 14-15.
7
Fig. 14
Lift the cover (7) away from the housing (Fig.16).
Lift the blade out. (Fig.17)
Fig. 16
Changing Blades
8
Fig. 17
Fig. 15
11
Advertisement
Table of Contents
