Summary of Contents for Kingxxel Tools Co M1E-LD-115
Page 1
OPERATOR'S MANUAL Cordless Grass / Shrub Shear Model M1E-LD-115/C (wheels and telescopic handle optional extra) For correct usage, read these instructions carefully and keep in a safe place for future reference. Imported by Winning Deals Ltd M5 3EJ...
Page 2
Intended Use This cordless grass / shrub shear are only intended for domestic light trimming of garden hedges, shrubs and lawn edges in your private domestic and hobby gardens. It is not suitable for commercial purposes, and any such use will void the guarantee.
Safety Precautions Explanation of symbols: Warning notice Read the instruction manual. Do not expose the tool to rain. Warning! The cutting blades continue to move after switching off. Warning! Keep bystanders away. Only use the battery charger indoors. Battery charger contains a safety transformer Eye protection must be used WARNING! ...
Page 4
When switching the trimming shears off, keep your hands well away from the blades, as they will continue to turn for a short time after switching off. Use the tool correctly and do not force it to perform jobs for which it was not intended.
Page 5
Personal safety Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
Page 6
To ensure that the power tool is safe, have it serviced at your local hardware store using only identical replacement parts. Special safety warning for this product Only use this tool in daylight, or good artificial light. When in use, keep all parts of your body away from the cutting blade.
Fig. 1 Charging Procedure (Fig. 1) 1. Insert the charger cable into charging inlet (19) on the tool. 2. Making sure the wall outlet in your home is normal household voltage (AC230-240V, 50Hz); insert the battery charger plug into the mains power supply. 3.
2. Starting and Stopping for cutting with the telescopic handle: Starting: 1) Push in the safety lock (17) and press the On/Off trigger (18) at the same time. 2) Release safety lock (17). Stopping: Release the On/Off switch (18). Operating Instructions Fig.
Page 10
Important! Any use, which is not expressly permitted in the manual, may result in damage to the machine and place the user in serious danger. Please carefully read the restrictions in the safety instructions. Important! Before each use, check for damaged/worn parts, especially check the blade for proper alignment.
The telescopic handle is designed only for use with the grass shear blade at ground level. Do not use the telescopic handle with the shrub shear or above ground level. After use replace the blade guard. Tips: Do not force the unit through dense growth, and if the blades slow down, reduce your speed.
Page 12
Fitting (Fig. 18-24) Fit the blade, there are two holes on the blade and two driving pins on the body. First align the end of blade inside the plastic housing, align the rear hole in the blade onto the rear drive pin (23). (Fig.18 and Fig.19). ...
Fig.24 Maintenance Blades can cause injury. Do not press the safety lock of the shear during maintenance work. Note: To ensure long and reliable service, regularly carry out the following maintenance: Check for obvious defects such as a damaged/ loose blade, fixings or components. ...
Fig. 25 Re-sharpening the grass shear blade (Fig.26): 1) Remove the blade from the shear. 2) Separate the upper blade (25) and lower blade (26) (Fig.26). 3) Remove any grass and dirt between the upper and lower blades. 4) Sharpen the blades by using a sharpening stone. 5) Fit the blades on the shear.
Do not dispose of power tools into household waste! According to the European Directive 2002/96/EC on waste electrical and electronic equipment and its incorporation into national law, products that are no longer suitable for use must be separately collected and sent for recovery in an environmentally-friendly manner.
Page 16
Removing the wheels: Remove the wheels in the exact reverse order in which they were fitted. 2. Fitting/Removing the telescopic handle (Grass shear only) (Fig.5-8) The telescopic handle is designed only for use with the grass shear blade at ground level. Do not use the telescopic handle with the shrub shear or above ground level. Fig.5 Fig.6 Fig.7...
Page 17
Fig.9 Fig.10 Adjusting the length of telescopic handle (Fig.9-10) 1) Loosen the adjusting bolt (15) (Fig.9) 2) Pull the tube out to increase the height, or push the tube in to decrease the height. (Fig.10) 3) Re-tighten the adjusting bolt (15). (Fig.9) Fig.11 Adjusting for edging mode (Fig.11) 1) Mount the telescopic handle in 90º...