JVC CD/Cassette Receiver KW-XC939 Installation & Connection Manual page 3

ENGLISH
If your car is equipped with the ISO connector
• Connect the ISO connectors as illustrated.
A B
C D
E F
G H
I J
ISO connector of the supplied power cord
K L
N
M
O P
View from the lead side
Connections without using the ISO connectors /
Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause
serious damage to this unit.
The leads of the power cord and those of the connector from the car body may be different in color.
1
Cut the ISO connector.
2
Connect the colored leads of the power cord to the car battery, speakers and power aerial (if
any) in the following sequence.
1 Black: ground
2 Yellow: to car battery (constant 12 V)
3 Red: to an accessory terminal
4 Blue with white stripe (Remote out): to remote lead of other equipment or power aerial if
any (200 mA max.)
5 Orange with white stripe: to illumination or small lamp terminal
6 Others: to speakers
3
Connect the aerial cord.
4
Finally connect the wiring harness to the unit.
1
Cut the ISO connector
Line out (see diagram )
3
To the car aerial
JVC CD changer jack
To other equipment (see diagram
*1 : Before checking the operation of this unit prior
to installation, this lead must be connected,
otherwise power cannot be turned on.
F E
White with black White
stripe
Left speaker (front)
For some VW/Audi or Opel (Vauxhall) automobile
You may need to modify the wiring of the supplied power cord as illustrated.
• Contact your authorized car dealer before installing this unit.
From the car body
Original wiring
Modified wiring 1
Modified wiring 2
JVC CD changer or another external
component
F-OUT R-OUT
L L
R R
Black
4
Yellow* 1
Red
)
Blue with white stripe
Orange with white stripe
6
D C
Gray with black Gray
stripe
Right speaker (front)
Yellow
Red
ISO connector
Red
Yellow
1
Red
Red
Yellow
2
Red
Red
1
2
1
2
3
4
5
6
3
4
• When connecting a CD changer, we recommend to use one of the CH-X series CD changers
(except for JVC MP3 compatible CD changer.)
If your CD changer is one of the KD-MK series, you need an optional cord (KS-U15K).
• You can also connect an external component such as a portable MD player by connecting the Line
Input Adapter KS-U57 (not supplied). (See diagram
Rear ground terminal
15 A fuse
*
P To metallic body or chassis of the car
1
To a live terminal in the fuse block connecting to the car
L
2
battery (bypassing the ignition switch)
O
3
M
To remote lead of other equipment or power aerial if any
4
N
5
To illumination or small lamp terminal
(ILLUMINATION)
H G
Green with black
stripe
3
Yellow
Red
Yellow
Use modified wiring 2 if the unit does not
turn on.
Red
Yellow
Red
.)
2
Not included with this unit.
*
B
Green Purple with black
stripe
Left speaker (rear)
2
Ignition switch
*
Fuse block
A
Purple
Right speaker (rear)