Download Print this page

JVC CD/Cassette Receiver KW-XC939 Installation & Connection Manual

Jvc in-car entertainment installation/connection manual
Hide thumbs Also See for CD/Cassette Receiver KW-XC939:

Advertisement

KW-XC939
Installation/Connection Manual
LVT1099-002A
[EE]
ENGLISH
• This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems.
INSTALLATION (IN-DASH MOUNTING)
The following illustration shows a typical installation. However, you should make adjustments
corresponding to your specific car. In this case consult the manual included with the installation kit
(option).
In some case, depending of the type and the model of your car, it is not possible to install the unit
into the center console.
If you have any questions or require information regarding installation kits, consult your JVC
IN-CAR ENTERTAINMENT dealer or a company supplying kits.
Before installing the unit
• To prevent short circuits, it is recommended to disconnect the battery's negative terminal and
make all electrical connections before installing the unit.
• For reason of security, do not install the unit in a place where it may disturb your driving or where
there is not enough ventilation space around the unit.
• When the installation position has been determined, confirm that the cords are sufficiently long.
• When mounting the unit, be sure to use the screws provided, as instructed. If other screws are
used, there is a possibility that parts could become loose or damaged.
• If you are not sure how to install this unit correctly, consult a JVC IN-CAR ENTERTAINMENT
dealer or have it installed by a qualified technician.
• When tightening screws or bolts be careful not to pinch any connection cord.
Caution:
To install the mounting brackets to the unit, use only the supplied screws (M5 x 6 mm).
If you use any screw longer than 6 mm, the unit can be damaged.
After installing the unit
Check if all the brake lamps, lights, flasher, wiper, etc. work correctly.
Parts list for installation and connection
The following parts are provided with this unit.
After checking them, please set them correctly.
Flat countersunk screws (M5 x 6 mm)
Binding screws (M5 x 6 mm)

TROUBLESHOOTING

• The fuse blows.
* Are the red and black leads connected correctly?
• Power cannot be turned on.
* Is the yellow lead connected?
• No sound from the speakers.
* Is the speaker output lead short-circuited?
• Sound is distorted.
* Is the speaker output lead grounded?
* Are the "–" terminals of L and R speakers grounded in common?
• Unit becomes hot.
* Is the speaker output lead grounded?
* Are the "–" terminals of L and R speakers grounded in common?
Power cord
Plate for use with a Nissan car
1
V
J
C
CR2025
Batteries
Remote controller
0603MNMMDWJEIN
EN, RU

Advertisement

loading

Summary of Contents for JVC CD/Cassette Receiver KW-XC939

  • Page 1: Troubleshooting

    • When mounting the unit, be sure to use the screws provided, as instructed. If other screws are used, there is a possibility that parts could become loose or damaged. • If you are not sure how to install this unit correctly, consult a JVC IN-CAR ENTERTAINMENT dealer or have it installed by a qualified technician.
  • Page 2: Electrical Connections

    JVC IN-CAR ENTERTAINMENT dealers. • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC IN-CAR ENTERTAINMENT dealer.
  • Page 3 • When connecting a CD changer, we recommend to use one of the CH-X series CD changers (except for JVC MP3 compatible CD changer.) If your CD changer is one of the KD-MK series, you need an optional cord (KS-U15K).
  • Page 4 You can connect another power amplifier for front speakers. CD changer or another external component / Cord (supplied with the CD changer) JVC CD changer Fig. 3 CAUTION / • To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.

This manual is also suitable for:

Kw-xc939