Specifications - Ultech Corporation DV2000 User Manual

6.4 Specifications

Front panel controls & indicators
Power on/off switch
Reset button
Program video LED
Monitor video LED
Data in LED
Time code LED
Hard disk LED
Setup LED
Floppy drive / LS-120 SuperDrive
Cursor keys
Rear Panel controls & connectors
IEC power output connector, rated 120 VAC at 3A Max or 240 VAC at 2A Max
IEC power input connector for detachable three wire AC line cord
120 VAC / 240 VAC line voltage selection switch
PS-2-style keyboard connector, 4 pin mini-DIN
PS-2-style mouse connector, 4 pin mini-DIN
RS-232 serial interface connector, DB9M.
VGA output connector, DB15F
(1) 800 mVpp serial digital video input BNC, terminated into 75 ohm
(2) 800 mVpp serial digital video output BNCs, with 75 ohm source impedance
LTC time code input, balanced, +4dBu nominal input level, 4 pin mini-DIN
850 mVpp serial digital monitor video input BNC, terminated into 75 ohm
1Vpp monitor video output BNC, with 75 ohm source impedance
Y/C monitor video output mini-DIN, with 75 ohm source impedance
Dual GPI port, pluggable header, with internal 4.7K ohm pull-up to +5VDC
Power
150 Watt, 50/60 Hz
90 VAC to 135 VAC (120 VAC setting)
180 VAC to 265 VAC (240 VAC setting)
Enclosure
Dimensions: 19" W (483) x 3.50" H (89) x 14.5" D (368)
Front panel: 0.125" aluminum, painted
Rear, tray, top: .042" steel, gold iridite
Weight: 18 lbs. (8.2 kg.)
Specifications subject to change without notice
6. Technical Reference 45