Cc Monitor Setup Menu; Time Code Offset Menu - Ultech Corporation DV2000 User Manual

4.3 CC Monitor Setup Menu

The monitor menu lets you determine which line 21 data service to monitor at the analog
monitor output connector. You can choose field 1 services: CC1, CC2, T1, T2, or you can
choose field 2 services: CC3, CC4, T3, T4, XDS (Extended Data Services). Press
cycle through the choices.
TIP: Choose a Text service (T1-T3) as a quick check for the presence of a closed caption
waveform—you will get a black box that nearly fills the monitor screen if a line 21 wave-
form is present.
Line 21 service
monitored
Help messages

4.4 Time Code Offset Menu

DV2000 contains an internal LTC time code reader. When an off-line closed caption or
subtitle job is run, captions/subtitles are processed when time code read from the LTC input
port matches time code from the caption/subtitle file. The timing for caption/subtitle files is
established from the time code provided to the caption agency. But when the job is run, the
time code accompanying the program video may have changed. The time code offset menu
lets you adjust time code read by the internal time code reader in increments of +/- 1 frame.
The time code offset is added to the time read by the internal LTC reader. The time code
displayed in the on-screen menu reflects the sum of incoming time code and the offset.
Menu name
4. Front Panel Operation, Menus
Navigation help
Important Note: Caption creators
go to extreme lengths when timing
captions. You should discuss changes
in time code with the agency that
provided the captions/subtitles before
offsetting time code.
19
to
ENTER