Ultech Corporation DV2000 User Manual page 28

28 ULTECH DV2000 User's Manual
Numeric command arguments can be entered in decimal or hexadecimal. A $ must prefix a
hexadecimal number if used as a numeric command argument.
Valid delimiters - {space} {;} {,} {=} and are denoted by |
Script Control Commands
Delay|n
The Delay command waits for n milliseconds before further script commands will execute.
Msg|string
The Msf command displays a string in the osd window of the DV2000's monitor output. It is
useful for cueing and aiding the DV2000 operator.
Example Msg This is a message
Pause
The Pause command waits for a front panel key or key press on the optional keyboard to be
pressed before further script commands will execute. The message 'Press any key to con-
tinue...' will be displayed on the monitor output.
Rem|string
The Rem command is used for inserting comment lines into a script file. All characters
following the Rem command will be ignored. This command is useful for displaying mes-
sages on the screen and adding comments to lines that contain no other commands.
Rerun
Reruns the script file from the beginning.
Script|filename
The Script command is used to pass control over to another script file. The extent of Control
passing is unlimited.
Example Script c:\test\test1.uxf
SetTime|n n=H:M:S:F
Establishes an arbitrary starting time when using simulated time code.
n=[0..65535]
string=[1..70 characters]
string=[1..70 characters]
filename must conform to MS-DOS file naming conventions.