1. Manuals
  2. Brands
  3. FabiaTech Manuals
  4. Touch Panel
  5. FP8082 Series
  6. User manual

FabiaTech FP8082 Series User Manual

Hide thumbs Also See for FP8082 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
FabiaTech Corporation
IPC Solution
Website:
http://www.fabiatech.com
Email:
support@fabiatech.com
Panel PC
FP8082 Series
User's Manual
JUL 2013
Version: 1.1
Part Number: FP8082

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FP8082 Series and is the answer not in the manual?

Questions and answers

Related Manuals for FabiaTech FP8082 Series

Summary of Contents for FabiaTech FP8082 Series

  • Page 1 FabiaTech Corporation IPC Solution Website: http://www.fabiatech.com Email: support@fabiatech.com Panel PC FP8082 Series User’s Manual JUL 2013 Version: 1.1 Part Number: FP8082...
  • Page 2 FabiaTech shall not be reliable for technical or editorial errors or omissions, which may occur in this document. FabiaTech shall not be reliable for any indirect, special, incidental or consequential damages resulting from the furnishing, performance, or use of this document.

  • Page 3: Table Of Contents

    Table of Contents FP8082 Panel PC User’s Manual ..................i Chapter 1 Introducing the FP8082 Panel PC ................1 Overview ..........................1 Series Comparison Table ....................... 2 Layout............................3 Specifications .......................... 4 Packing List ..........................6 Chapter 2 Hardware Installation ....................7 Before Installation ........................
  • Page 4 Security setup ........................44 Chipset Setup ........................46 North Bridge Configuration ................47 　 South Bridge Configuration ................49 　 Chapter 4 Software Installation ....................51 System Driver ......................... 51 WIN 2000/XP Driver ..................... 51 VGA Driver ..........................52 WIN 2000/XP Driver ..................... 52 Audio Driver ...........................
  • Page 5 CMOS RAM Map ......................67 Serial Ports ........................68 Appendix ........................... 72 Dimension ..........................72...

  • Page 7: Chapter 1 Introducing The Fp8082 Panel Pc

    FabiaTech Corporation Chapter 1 Introducing the FP8082 Panel PC Overview The FP8082 is 8.4-inch TFT Panel PC, this panel PC with Intel® Atom™ N270 low- power CPU module inside and touch screen device, this user’s manual provides information on the physical features, installation, and BIOS setup of the FP8082.

  • Page 8: Series Comparison Table

    FabiaTech Corporation Series Comparison Table Model FP8082T System Processor Intel ® Atom™ N270 1.6GHZ N+S-Chipset Intel 945GSE+ 8280GBM(ICH7M) Memory DDR2 400/533 1*200 Pin - DIMM (Max.) 1GB/2GB Storage HDD One CF and SATA Watchdog Timer Multi I/O One RS232/RS422/RS485 and Five RS232 USB 2.0...

  • Page 9: Layout

    FabiaTech Corporation Layout FP8082 Antenna Antenna EAR-PHONE Antenna COM2 COM3 COM4 COM5 COM6 POWER BUTTON COM1 DC-IN KB/MOUSE RESET...

  • Page 10: Specifications

    FabiaTech Corporation Specifications Processor Board – I Intel ® Atom™ N270 1.6GHZ Low Power Processor with 1GB DDR2-RAM I/O Outlets – One PCIe 10/100/1000 base-TX Ethernet LAN ports and Six USB ports (2.0) One RS-232/RS422/RS485 port and five RS232 ports with DB9...
  • Page 11 FabiaTech Corporation Power requirement – +12V ~ +24V DC, 2.6A Maximum (1.36A typical) with DC19V Input Dimensions – 60.0mm (D) x 250.0mm (W) x 180.0mm (H)

  • Page 12: Packing List

    FabiaTech Corporation Packing List Upon receiving the package, verify the following things. Should any of the mentioned happens, contact us for immediate service. • Unpack and inspect the FP8082 package for possible damage that may occur during the delivery process.

  • Page 13: Chapter 2 Hardware Installation

    FabiaTech Corporation Chapter 2 Hardware Installation This chapter introduces the system connectors and guides you to apply them for field application. Before Installation Before you install the system, make sure you follow the following descriptions. 1. Before removing the cover, shut down the operation System and disconnect power switch to off and unplug AC cable.

  • Page 14: Removing Covers -Installing Hardware

    FabiaTech Corporation Removing Covers –Installing Hardware If you are installing hardware option, you can remove the right side or back side cover. The following figure will guide you how to install Compact Flash modules, 2.5" SATA HDD inside, PCIe mini card module, DDR2-RAM module to the FP8082, and how to install the FP8082 fixers.
  • Page 15 FabiaTech Corporation b2. Unscrews the Right Side Metal Frame M3X3 b3. Unscrews the Bottom Side I/O Metal Frame M3X3 b4. Unscrews and Separate the Main Board PAD 2t PAD 3t M3X5 Caution: Please do not touch the surface of thermal pads and avoid removing...
  • Page 16 FabiaTech Corporation c. Fasten Screws the SATA HDD into the HDD Metal Frame M3X2 Note: 1. Remove the inverter board before installing hard disk. 2. Use caution when handling the hard disk to prevent damage to SATA connector as you inserted hard disk. Be careful with the orientation when installing connectors.
  • Page 17 FabiaTech Corporation e. Installing PCIe Mini Card You may extend additional PCIe mini card WLAN module or SIM card to FP8082 by removing the covers. Connect the antenna cable from right side antenna hole to PCIe Mini card WLAN (the auxiliary board).
  • Page 18 FabiaTech Corporation f. Installing the universal fixers on FP8082 Please refer to the back side figure for installing the FP8082with universal fixers. f1. FP8082 - Panel Mounting Kit with VESA 75/100 mm Standards M3X4 f2. Embedded Wall mounting M4X4 WALL...
  • Page 19 FabiaTech Corporation f3. FP8081K1 - DIN RAIL mounting kit M3X6...

  • Page 20: I/O Peripheral Connectors Panel

    FabiaTech Corporation I/O Peripheral Connectors Panel View from the bottom and right side, If you are connecting the monitor, keyboard, mouse, LAN, audio, COM and USB to the FP8082. See following figure and a side pictures. a. Bottom Side of FP8082Panel PC...
  • Page 21 FabiaTech Corporation 1. A VGA(CRT) connector is provided for VGA signals DB15 Signal Green Blue Hsync Vsync DDC Data DDC Clock 5 & 10 Digital Ground 6,7,8 Analog Ground Others Not Used 2. The connectors use the included adapter cable you can attach standard PS/2 type keyboard and mouse.
  • Page 22 FabiaTech Corporation Connecting the LAN port The RJ45 connector with 2 LED’s for LAN. The left side LED indicates data is being accessed and the right side LED indicates on-line status. (On indicates on-line and off indicates off-line) RJ45 connector The following lists the pin assignment of RJ45.

  • Page 23: Connecting The Dc Power And Power Button

    FabiaTech Corporation Connecting the DC Power and Power Button Power is supplied through an external AC/DC power adapter or power DC In. Check the technical specification section for information about AC/DC power input voltage. See following figure and a side pictures.
  • Page 24 FabiaTech Corporation...

  • Page 25: Chapter 3 Bios Setup

    FabiaTech Corporation Chapter 3 BIOS Setup This chapter describes the BIOS setup. Overview BIOS are a program located on a Flash memory chip on a circuit board. It is used to initialize and set up the I/O peripherals and interface cards of the system, which includes time, date, hard disk drive, the ISA bus and connected devices such as the video display, diskette drive, and the keyboard.

  • Page 26: Bios Functions

    FabiaTech Corporation BIOS Functions On the menu, you can perform the following functions 1. Main 2. Advanced CPU Configuration IDE Configuration SuperIO Configuration Hardware Health Configuration ACPI APM Configuration USB Configuration 3. PCIPnP 4. Boot Boot Settings Configuration Boot Device Priority...

  • Page 27: Keyboard Convention

    FabiaTech Corporation 6. Chipset North Bridge Configuration South Bridge Configuration 7. Exit Save Changes and Exit: Exit system setup after saving the changes.F10 key can be used for this operation. Discard Changes and Exit: Exit system setup without saving any changes.

  • Page 28: Main Setup

    FabiaTech Corporation Main Setup This section describes basic system hardware configuration, system clock setup and BIOS version information. If the CPU board is already installed in a working system, you will not need to select this option anymore. System Memory...

  • Page 29: Advanced Setup

    FabiaTech Corporation Advanced Setup Select the Advanced tab from the setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as SuperIO Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...

  • Page 30: Ide Configuration

    FabiaTech Corporation IDE Configuration You can use this screen to select options for the IDE Configuration Settings. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 31 FabiaTech Corporation Primary/Secondary IDE Master/Slave IDE hard drive controllers can support up to two separate hard drives. These drives have a master/slave relationship, which is determined by the cabling configuration used to attach them to the controller. Your system supports one IDE controller – a primary –...
  • Page 32 FabiaTech Corporation Hard Disk Write Protect Set this option to protect the hard disk drive from being overwritten. The Optimal and Fail-Safe default setting is disabled. Available Options: Disabled, Enabled Default setting: Disabled IDE Detect Time Out (Sec.) Set this option to stop the AMIBIOS from searching for IDE devices within the specified number of seconds.

  • Page 33: Superio Chipset - Configuration Win627 Super Io Chipset

    FabiaTech Corporation SuperIO Chipset - Configuration Win627 Super IO Chipset This section describes the function of Super I/O settings. KBC Clock Rate Selection This field is select Keyboard clock rate selecting 6MHz/8MHz/12MHz/16MHz Controller. Available Options: 6MHz, 8MHz, 12MHz and 16MHz...
  • Page 34 FabiaTech Corporation Serial Port 2 Address These fields select the I/O port address for each Serial port. Available Options: Disabled, 2F8H/IRQ3, 3E8H/IRQ4, and 2E8H/IRQ3. Default setting: 2F8H/IRQ3 Serial Port 3 Address These fields select the I/O port address for each Serial port.
  • Page 35 FabiaTech Corporation Serial Port5 IRQ These fields item can select the IRQ of Serial port 5. Available Options: 10, and 11 Default setting: 11 Serial Port 6 Address These fields select the I/O port address for each Serial port. Available Options: Disabled, 3E0, and 2E0.

  • Page 36: Hardware Health Configuration

    FabiaTech Corporation Hardware Health Configuration On the Hardware Monitor Setup screen, you can monitor the system temperature, CPU voltage, and VCC voltage…...

  • Page 37: Advanced Acpi Settings

    FabiaTech Corporation Advanced ACPI Settings ACPI Aware O/S This filed specifies allow you set this value to utilize the ACPI (Advanced Configuration and Power Interface) specification. Available Options: Yes, and No Default setting: Yes Advanced ACPI Configuration ACPI Version Feature Set this value to allow or prevent the system to be complaint with the ACPI Specification.
  • Page 38 FabiaTech Corporation Available Options: Enabled, and Disabled Default setting: Enabled Chipset ACPI Configuration APIC ACPI SCI IRQ Allows you to enable or disable the internal I/O APIC and Multiprocessor Tables. (Disable the APIC ACPI SCI IRQ may require the O.S. to be reinstalled)

  • Page 39: Apm Configuration

    FabiaTech Corporation APM Configuration You can use this screen to select options for the USB Configuration. Power Manager /APM Select Enabled to activate the chipset Power Management and APM (Advanced Power Management) features. Available Options: Disabled and Enabled Default setting: Enabled...
  • Page 40 FabiaTech Corporation Available Options: Disabled, and Suspend Default setting: Disabled Suspend Time Out This field specifies the length of time the system waits before it enters suspend mode. Available Options: Disabled, 1 Minute, 2 Minute, 4 Minute, and 8 Minute, up to 60 Minute.

  • Page 41: Usb Configuration

    FabiaTech Corporation USB Configuration You can use this screen to select options for the USB Configuration. Legacy USB Support Legacy USB Support refers to the USB mouse and USB keyboard support. Normally if this option is not enabled; any attached USB mouse or USB keyboard will not become available until a USB compatible operating system is fully booted with all USB drivers loaded.
  • Page 42 FabiaTech Corporation BIOS ECHI Hand-Off This is a workaround for OS without ECHI Hand-Off support. The ECHI ownership change should claim by ECHI driver. Available Options: Enabled, and Disabled Default setting: Enabled...

  • Page 43: Pcipnp Setup

    FabiaTech Corporation PCIPnP Setup Select the PCI/PnP tab from the setup screen to enter the Plug and Play BIOS Setup screen. You can display a Plug and Play BIOS Setup option by highlighting it using the <Arrow> keys. All Plug and Play BIOS Setup options are described in this section. The Plug and Play BIOS Setup screen is shown below.
  • Page 44 FabiaTech Corporation PCI Latency Timer This field specifies the latency timings (in PCI clock) PCI devices installed in the PCI expansion bus. Available Options: 32, 64, 96, 128, 160,192, 224, and 248 Default setting: 64 PCI IDE BusMaster This option is to specify that the IDE controller on the PCI local bus have bus- mastering capability.

  • Page 45: Boot Setup

    FabiaTech Corporation Boot Setup Select the Boot tab from the setup screen to enter the Boot BIOS Setup screen. You can select any of the items in the left frame of the screen, such as Boot Device Priority, to go to the sub menu for that item. You can display a Boot BIOS Setup option by highlighting it using the <Arrow>...

  • Page 46: Boot Setting Configuration

    FabiaTech Corporation Boot Setting Configuration Quick Boot This field is used to activate the quick boot function of the system. When set to Enabled, 1. BIOS will not wait for up to 40 seconds if a Ready signal is not received from the IDE drive, and will not configure its drive.
  • Page 47 FabiaTech Corporation Available options: On, Off Default setting: On PS/2 Mouse Support The PS/2 mouse function is optional. Before you configure this field, make sure your system board supports this feature. The setting of Enabled allows the system to detect a PS/2 mouse on boot up. If detected, IRQ12 will be used for the PS/2 mouse.

  • Page 48: Boot Device

    FabiaTech Corporation Boot Device Use this screen to specify the order in which the system checks for the device to boot from. To access this screen, select Boot Device Priority on the Boot Setup screen and press <Enter>. First /Second /Third Hard Disk Boot Device Set the boot device options to determine the sequence in which the computer checks which device to boot from.

  • Page 49: Hard Disk Drives

    FabiaTech Corporation Hard Disk Drives Use this screen to view the hard disk drives in the system. To access this screen, select Hard disk drives on the Boot Setup screen and press <Enter>. Removable Drives Use this screen to view the removable drives in the system. To access this screen,...

  • Page 50: Security Setup

    FabiaTech Corporation Security setup There are two security passwords: Supervisor and User. Supervisor is a privileged person that can change the User password from the BIOS. According to the default setting, both access passwords are not set up and are only valid after you set the password from the BIOS.
  • Page 51 FabiaTech Corporation 5. Select System or Setup. Always: a visitor who attempts to enter BIOS or operating system will be prompted for password. Setup: a visitor who attempts to the operating system will be prompted for user password. You can enter either User password or Supervisor password.

  • Page 52: Chipset Setup

    FabiaTech Corporation Chipset Setup This section describes the configuration of the board’s chipset features. • North Bridge Configuration • South Bridge Configuration...

  • Page 53: North Bridge Configuration

    FabiaTech Corporation North Bridge Configuration You can use this screen to select options for the North Bridge Configuration. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option.
  • Page 54 FabiaTech Corporation Internal Graphics Mode Select This field is share memory architecture (SMA) for frame buffer memory. SMA allows system memory to be efficiently share by the host CPU and allocated depending on user preference, application requirements, and total size of system memory.

  • Page 55: South Bridge Configuration

    FabiaTech Corporation South Bridge Configuration You can use this screen to select options for the South Bridge Configuration. South Bridge is a chipset on the motherboard that controls the basic I/O functions, LAN port, and audio function. USB Function Select Enabled, if a USB device is installed to the system. If Disabled are selected, the system will not be able to use a USB device.
  • Page 56 FabiaTech Corporation Audio Controller This field specifies the internal Audio Control. Available Options: Disabled and Azalia Default setting: Azalia Restore On AC Power Lose This field specifies the option controls how the PC will behave once power is restored following a power outage (or other unexpected or ungraceful shutdown).

  • Page 57: Chapter 4 Software Installation

    FabiaTech Corporation Chapter 4 Software Installation The enclosed CD diskette includes FP8082 VGA, Audio, System, Touch Screen and LAN driver. To install and configure you FP8082 system, you need to perform the following steps. System Driver WIN 2000/XP Driver Installs 945GSE Chipset, IRQ Routing, USB, AGP Driver and ISA IDE Bus Master Drive.

  • Page 58: Vga Driver

    FabiaTech Corporation VGA Driver WIN 2000/XP Driver Step 1: To install the VGA driver, insert the CD ROM into the CD ROM device, and enter DRIVER>VGA>945GSE>WIN2K_XP. Step 2: Execute SETUP.EXE file. Step 3: The screen shows the SETUP type. Press any key to enter the main menu.

  • Page 59: Lan Driver (Rtl 8111C)

    FabiaTech Corporation LAN Driver (RTL 8111C) WIN 2000/XP Driver Step 1: To install the LAN driver, insert the CD ROM into the CD ROM device, and enter DRIVER>LAN>RTL8111C. If your system is not equipped with a CD ROM device, copy the LAN driver from the CD ROM to CF.

  • Page 60: Watchdog Timer

    FabiaTech Corporation Watchdog Timer This section describes how to use the Watchdog Timer, including disabled, enabled, and trigger functions. The system is equipped with a programmable time-out period watchdog timer. You can use your own program to enable the watchdog timer. Once you have enabled the watchdog timer, the program should trigger the I/O every time before the timer times out.

  • Page 61: Watchdog Timer Setting

    FabiaTech Corporation Watchdog Timer Setting The watchdog timer is a circuit that may be used from your program software to detect system crashes or hang-ups. The watchdog timer is automatically disabled after reset. Once you have enabled the watchdog timer, your program must trigger the watchdog timer every time before it times out.

  • Page 62: Watchdog Timer Enabled

    FabiaTech Corporation Watchdog Timer Enabled To enable the watchdog timer, you have to output a byte of timer factor to the watchdog register whose address is 2Eh and data port is 2fH. The following is an Assemble program, which demonstrates how to enable the watchdog timer and set the time-out period at 28 seconds.

  • Page 63: Watchdog Timer Disabled

    FabiaTech Corporation Watchdog Timer Disabled To disable the watchdog timer, simply write a 00H to the watchdog register. ;------------------------------------------------------------------------------------------ ; Enter the extended function mode, interruptible double-write ;------------------------------------------------------------------------------------------ dx,2eh ; Enter to extended function mode al,87h dx,al dx,al ;------------------------------------------------------------------------------------------------------------------------ ; Logical device 8, configuration register CRF5 Bit 3(Sec./Min.), CRF6 Bit 0~7 (Count.) ;------------------------------------------------------------------------------------------------------------------------...

  • Page 64: Programming Rs-485

    FabiaTech Corporation Programming RS-485 The majority communicative operation of the RS-485 is in the same of the RS-232. When the RS-485 precedes the transmission, which needs control the TXC signal, and the installing, steps are as follows: Step 1: Enable TXC...

  • Page 65: Send Out One Character (Transmit)

    FabiaTech Corporation Send out one character (Transmit) Step 1: Enabled TXC signal, and the bit 0 of the address of offset+4 just sets “1”. Step 2: Send out the data. (Write this character to the offset+0 of the current COM port address) Step 3: Wait for the buffer’s data empty.
  • Page 66 FabiaTech Corporation RETURN b. Send out one character to COM1 REM Enabled transmitter by setting DTR ON OUT &H3FC, (INP (&H3FC) OR &H01) REM Send out one character PRINT #1, OUTCHR$ REM Check transmitter holding register and shift register IF ((INP (&H3FD) AND &H60) >0) THEN 60 REM Disabled transmitter by resetting DTR OUT &H3FC, (INP (&H3FC) AND &HEF)

  • Page 67: Chapter 5 Technical Reference

    FabiaTech Corporation Chapter 5 Technical Reference This section outlines the errors that may occur when you operate the system, and also gives you the suggestions on solving the problems. Topic include: Trouble Shooting for Post Beep & Error Messages LCD Display and Touch Screen...
  • Page 68 FabiaTech Corporation CMOS CHECKSUM ERROR This error informs that the CMOS has corrupted. When the battery runs weak, this situation might happen. Please check the battery and change a new one when necessary. DISK BOOT FAILURE When you can‘t find the boot device, insert a system disk into Drive A and press <...
  • Page 69 FabiaTech Corporation MEMORY ADDRESS ERROR When the memory address indicates error, you can use this location along with the memory map for your system to find and replace the bad memory chips. MEMORY SIZE HAS CHANGED Memory has been added or removed since last boot. In EISA mode, use Configuration Utility to re-configure the memory configuration.

  • Page 70: Touch Screen

    FabiaTech Corporation Touch Screen The following information informs the LCD and touch serene driver. Please adjust your systems according to the messages below. Make sure all the components and connectors are in proper position and firmly attached. If the errors still exist, please contact with your distributor for maintenance.

  • Page 71: Technical Reference

    FabiaTech Corporation Technical Reference Physical and Environmental Temperature: Operating 0°C ~ 50°C Relative humidity 5 % to 95 % non-condensing DC-AC adapter: Manufacture: Delta Electronics Incs Model: SADP-65KDB Input AC Voltage Range: 100V~240V/1A, 50Hz ~60Hz Output DC Voltage: 19V/3.42A Maximum Surface Temperature of Chassis：...
  • Page 72 FabiaTech Corporation Address Description Status register B Status register C Status register D Diagnostic status byte Shutdown status byte Diskette drive type byte, drive A and B Fixed disk type byte, drive C Fixed disk type byte, drive D Reserved...

  • Page 73: Cmos Ram Map

    FabiaTech Corporation CMOS RAM Map Register Description 00h -10h Standard AT-compatible RTC and Status and Status Register data definitions 11h – 13h Varies Equipment Bits Number of Floppy Drives 1 Drive 2 Drives Bits Monitor Type Not CGA or MDA 01 40x25 CGA...

  • Page 74: Serial Ports

    FabiaTech Corporation Serial Ports The ACEs (Asynchronous Communication Elements ACE1 to ACE2) are used to convert parallel data to a serial format on the transmit side and convert serial data to parallel on the receiver side. The serial format, in order of transmission and reception, is a start bit, followed by five to eight data bits, a parity bit (if programmed) and one, one and half (five-bit format only) or two stop bits.
  • Page 75 FabiaTech Corporation Bit 1: Enable Transmitter Holding Empty Interrupt (ETBEI) Bit 2: Enable Receiver Line Status Interrupt (ELSI) Bit 3: Enable MODEM Status Interrupt (EDSSI) Bit 4: Must be 0 Bit 5: Must be 0 Bit 6: Must be 0...
  • Page 76 FabiaTech Corporation Bit 5: Stick Parity Bit 6: Set Break Bit 7: Divisor Latch Access Bit (DLAB) MODEM Control Register (MCR) Bit 0: Data Terminal Ready (DTR) Bit 1: Request to Send (RTS) Bit 2: Out 1 (OUT 1) Bit 3: Out 2 (OUT 2)
  • Page 77 FabiaTech Corporation Bit 4: Clear to Send (CTS) Bit 5: Data Set Ready (DSR) Bit 6: Ring Indicator (RI) Bit 7: Received Line Signal Detect (RSLD) Divisor Latch (LS, MS) Bit 0: Bit 0 Bit 8 Bit 1: Bit 1...

  • Page 78: Appendix

    FabiaTech Corporation Appendix Dimension a. FP8082 220.4 14.8...
  • Page 79 FabiaTech Corporation b. FP8082 PANEL Mounting with VESA 75*75/100*100 mm R2.75...
  • Page 80 FabiaTech Corporation c. FP8082- Wall Mounting Cut-Out Dimension 220.4 Cut out dimension 222 x 151 mm...
  • Page 81 FabiaTech Corporation d. FP8081K1-DIN Rail mounting universal fixers 89.5 Rail Adapter for h=7.5 10.5(REF) for h=15 18(REF) On 35mm Din-Rails (EN 50022:1977)

Table of Contents