RSP-976 Surround Processor English 1: Controls and Connections SURROUND SOUND PROCESSOR RSP-976 STANDBY RBDS RDS VIDEO 1 TAPE 2M TUNED AUTO MEMORY PRESET O S D VIDEO2 OPTICAL VIDEO3 COAXIAL VD4AUX SOURCE MPEG DIGITAL Pro Logic 3Stereo MODE DB-25 D.RANGE...
English 2: RR-969 Remote AV 1 AV 2 AV 3 POWER INPUT BAND MUTE GUIDE MENU PLAY DISC1 DISC2 DISC3 DISC4 DISC5 TAPE1 TAPE2 TRACK PROGRAM RANDOM REPEAT DISC DISC+ PAUSE STOP PREV CH SETUP AUDIO ANGLE SUBTITLE TITLE FILTER EXT IN ZONE PRESET...
RSP-976 Surround Processor 3: Outputs FRONT REAR CENTER WOOFER Manufactured under license from Digital Theater System, Inc. 12V TRIGGER US Pat. No. 5,451,242 and other world-wide patents, issues 5.1 CH OUTPUT 5.1 CH INPUT and pending. "DTS", DTS Digital surround", are trademarks of...
CAUTION Digital Theater System, Inc. Copyright 1996 Digital Theater System, Inc. All rights reserved. RISK OF ELECTRIC SHOCK SURROUND SOUND PROCESSOR DO NOT OPEN MODEL NO. RSP-976 AVIS: RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR POWER CONSUMPTION: 40 WATTS FRONT REAR...
RSP-976 English Cautions WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not allow foreign objects to get into the enclosure. If the...
AUD button on the remote before goal - the pursuit of equipment that is musi- the box as it will protect the RSP-976 if you you start. The AUDIO mode will stay active cal, reliable and affordable. move or need to return it for maintenance.
RSP-976 and the remote. When only one ap- PLAY show tone control settings as you adjust : The five video inputs accept either ana- NOTE pears, that function is found only on the RSP-976 them. log audio/video signals or digital signals in- or the remote.
This is “pure” stereo, using the front left and front right speakers only, with no sur- : The RECORD function requires analog : Leaving the RSP-976 in PRO LOGIC NOTE NOTE round channels and no center channel.
TAPE Inputs and Outputs puts and outputs, plus coaxial and optical digital inputs and outputs. VIDEO 1–3 Composite The RSP-976 provides a pair of inputs and a S-Video Video Outputs The RSP-976 has RCA preamp outputs for use pair of record outputs for connecting an ana- with external amplifiers and both composite log audio tape deck.
DB25 audio cable from the This 3.5 mm mini-jack receives command codes to DB25 adaptor cable from your authorized output of the RSP-976 to the input on the from industry-standard infrared receivers Rotel dealer. multichannel power amplifier.
The MAIN menu provides access to all other Music 2, Music 3, Music 4, PCM 2 Channel, this case, you would tell the RSP-976 that all screens and menus and is reached by press- and Dolby Digital 2- ch Stereo. [???? -- Is...
English DELAY SETUP Menu BASS LEVEL Menu be classified as LARGE and the subwoofer setting would be OFF for all surround modes. No information will be lost during playback BASS LEVEL DELAY SETUP because the system knows to redirect the bass Dolby Dolby information to the front LARGE speakers.
UP/ POWER: This setting determines how the DOWN buttons. The test tone will shift accord- RSP-976 powers up. With the default STANDBY ingly to the selected speaker. setting, the unit powers up in standby mode...
All specifications are accurate at the time of printing. Rotel reserves the right to make improvements without notice. Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan. DTS is a registered trademark of Digital Theater Systems.
Page 18
Fax: +1 978-664-4109 Rotel Europe Meadow Road Worthing, West Sussex BN11 2RX England Phone: +44 (0)1903 524 813 Fax: +44 (0)1903 524 831 Rotel Deutschland Kleine Heide 12 D-33790 Halle/Westf. Germany Phone: +49 05201-87170 Fax: +49 05201-73370 www.rotel.com 082 OM-RSP-976 English 022100...
Need help?
Do you have a question about the RSP-976 and is the answer not in the manual?
Questions and answers