RSP-976 Surround Sound Processor 1: Controls and Connections SURROUND SOUND PROCESSOR RSP-976 STANDBY RBDS RDS VIDEO 1 TAPE 2M TUNED AUTO MEMORY PRESET O S D VIDEO2 OPTICAL VIDEO3 COAXIAL VD4AUX SOURCE DIGITAL Pro Logic 3Stereo MODE 5.1ch D.RANGE TREBLE...
English 2: RR-969 Remote AV 1 AV 2 AV 3 POWER INPUT BAND MUTE GUIDE MENU PLAY DISC1 DISC2 DISC3 DISC4 DISC5 TAPE1 TAPE2 TRACK PROGRAM RANDOM REPEAT DISC DISC+ PAUSE STOP PREV CH SETUP AUDIO ANGLE SUBTITLE TITLE FILTER EXT IN ZONE PRESET...
RSP-976 Surround Sound Processor 3: Outputs AMPLIFIER SUBWOOFER FRONT REAR CENTER WOOFER ROTEL RSP-976 5.1 CH INPUT This device complies with Part 15 of the FCC Rules. COMPUTER ZONE 12V TRIGGER Operation is subject to the following two conditions: IR OUT COMPONENT VIDEO REM.
ZONE FRONT REAR CENTER FRONT REAR WOOFER SURROUND SOUND DIGITAL INPUT DIGITAL OUPUT PROCESSOR COAXIAL OPTICAL MODEL NO. RSP-976 S-VIDEO IN S-VIDEO OUT POWER CONSUMPTION: CENTER OPTICAL COAXIAL 40 WATTS OUTPUT RSP-976 MON. WOOFER V2.0 Manufactured under license from Digital Theater System, Inc.
RSP-976 Surround Sound Processor 5: Zone 2 Connections AM/FM ROTEL RSP-976 5.1 CH INPUT This device complies with Part 15 of the FCC Rules. COMPUTER ZONE 12V TRIGGER Operation is subject to the following two conditions: IR OUT COMPONENT VIDEO REM IN REM.
RSP-976 Surround Sound Processor Cautions WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not allow foreign objects to get into the enclosure.
RR-969 not operate the RSP-976, the the remote control and other accessories. Save programming may have been changed. To re- the box as it will protect the RSP-976 if you store the RSP-976 programming, press the re- move or need to return it for maintenance.
MENU button again to turn the dis- bers in gray boxes refer to the RSP-976 illus- right. At the bottom of the display are status play back on. The display also turns back on tration at the front of this manual.
RSP-976 activates the proper decoding. In most DSP Button The RSP-976 can record from any analog cases, the RSP-976 will also recognize a digital source input to a VCR or other recorder con- signal encoded with Dolby Pro Logic for pro-...
NOTE ON-SCREEN DISPLAY menu during the initial configured using the INPUT MENU of the setup of the RSP-976. You can also adjust the • MIN (full compression/minimum dynamic ON-SCREEN DISPLAY system. We recom- relative volume of the center, rear, or subwoofer range).
S-Video output of that component to one to the unit. If you make multiple connections of the inputs on the RSP-976 labeled S-VIDEO The record outputs for VIDEO 1, 2, and 3 to a single source (i.e. RCA composite and S- IN using a standard S-Video interconnect cable.
Digital Outputs To hook up a powered subwoofer, Digital Source Connections The RSP-976 has a digital output (with a choice connect a standard RCA audio cable from the of coaxial or optical connectors) to send the SUBWOOFER OUTPUT jack to the input on digital signal from any of the five digital in- the subwoofer’s power amp.
The RSP-976 can be operated from a personal remembering last previous setting when- computer running audio system control soft- When the RSP-976 is powered on in the main ever Zone 2 is activated. FIXED output ware from third-party developers. This control...
See your authorized Rotel dealer for information pair of speakers in the remote zone. when the RSP-976 is fully activated in the main on IR repeater systems. room (i.e. the display is visible). If the RSP-976...
Most menus are MAIN MENU used only to configure the system and not typi- INPUT: Setup cally during normal operation. The RSP-976 features two on-screen systems SPEAKER: Setup DELAY: Setup to help operate the system. The first consists SYSTEM STATUS Menu...
In done once. properly configure that source. this case, you would tell the RSP-976 that all of your speakers are SMALL, without regard To change a setting, place the highlight on the to how big they may actually be.
RSP-976 Surround Sound Processor DELAY SETUP Menu TEST TONE Menu The available settings for the CENTER chan- nel (Dolby Digital only) are 0ms, 1ms, 2ms, 3ms, 4ms, and 5ms. For SURROUND (Dolby DELAY SETUP TEST TONE Digital), the settings are 0ms, 5ms, 10ms, and...
VARIABLE allows control of the volume settings • MIN (full compression/minimum dynamic menu and pressing ENTER. in Zone 2 from the RSP-976 front panel or from range). a remote control and IR repeater in Zone 2. Press the ENTER button to reset all settings. Press 5.1CH: determines whether or 5.1 channel...
All specifications are accurate at the time of printing. Rotel reserves the right to make improvements without notice. Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan. DTS is a registered trademark of Digital Theater Systems.
Page 23
Rotel Europe Meadow Road Worthing, West Sussex BN11 2RX England Phone: +44 (0)1903 524 813 Fax: +44 (0)1903 524 831 Rotel Deutschland Kleine Heide 12 D-33790 Halle/Westf. Germany Phone: +49 05201-87170 Fax: +49 05201-73370 www.rotel.com 082 OM-RSP-976 V2.0 English 052900...