Page 1
RSP-975 DIGITAL SURROUND SOUND PROCESSOR DIGITAL SURROUND SOUND PROCESSOR RSP-975 MASTER VOLUME STANDBY MUTE PEAK REMOTE REMOTE SENSOR Owner‘s Manual LISTENING TUNER TAPE VIDEO 1 VIDEO 2 VIDEO 3 DIGITAL INPUT ANALOG INPUT OPTICAL COAX 1 COAX 2 DYNAMIC RANGE...
Page 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR THE USAGE CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT.
Figure 1: Controls and Connections DIGITAL SURROUND SOUND PROCESSOR RSP-975 STANDBY MUTE PEAK REMOTE REMOTE SENSOR SPEAKER CONFIGURATION CENTER FRONT REAR SMALL SMALL SMALL NONE LARGE LARGE LARGE TUNER TAPE VIDEO 1 MASTER VOLUME 5.1 CH INPUT REMOTE MONITOR EXTERNAL...
DIGITAL SURROUND SOUND PROCESSOR RSP-975 Figure 2: Remote Control TAPE POWER BAND MUTE T / V SURROUND + ON SCREEN GUIDE MENU PAUSE C. DELAY TRACK – TRACK + PLAY DOWN STOP DYNAMIC RECALL OPN/CLS SUR DELAY MOVIE FILT DISC 1...
OPTI S-VIDEO DIGITAL COMPOSITE FRONT REAR CENTER OPTI SUBWOOFER DIGITAL INPUT OPTICAL DIGITAL SURROUND SOUND PROCESSOR MODEL NO. RSP-975 POWER CONSUMPTION: 30W RSP-975 COAXIAL NSTC CAUTION VIDEO RECORDER AUDIO INPUT VIDEO INPUT S-VIDEO LEFT COMPOSITE RIGHT DVD PLAYER DTS DECODER...
Remove the unit carefully from its packing. Look for the handheld remote controller and other accessories. Save the packing and box if possible as it will protect the RSP-975 if you move or need to return it to us for maintenance.
RSP-975. Note: The STANDBY switch controls the rear panel AC outlet. When the RSP-975 is in standby mode the AC outlet is also off. When the RSP-975 is fully functional, the AC outlet is live.
Front Panel Controls section of this manual if you need additional information. To operate the RSP-975 with the remote, make sure that the AU- DIO mode is active by pressing the AUD button on the remote be- fore you start. If it is active, pressing command keys on the RR-939 will cause the AUDIO button to flash red.
2. Use the NUMERIC buttons to enter the 3-digit code (001) for the RSP-975 – press 0, then 0, then 1. The AUDIO button will flash each time you enter a digit. 3. Store the code number by pressing the corresponding AUDIO button again.
LISTENING SOURCE input. ON-SCREEN Button (remote only) Push this button to turn on the ON-SCREEN DISPLAY. If the ON- SCREEN DISPLAY is already visible, push this button once or twice to cancel the display. See next section for details. RSP-975...
DIGITAL SURROUND SOUND PROCESSOR RSP-975 The On-Screen Display The RSP-975 features two ON-SCREEN DISPLAY screens to help operate the system. These screens are available at any time by pressing the ON-SCREEN MENU button on the remote control to activate the first screen. Push the button a second time to go to the second screen (OUTPUT BALANCE).
INPUTS on the RSP-975. For example, if your system in- cludes a CD player, connect its left and right channel analog outputs to the RSP-975’s CD inputs. If your system includes a video source, connect its analog audio outputs to one of the RSP-975’s VIDEO audio inputs and its video composite RCA output to the cor- responding composite RCA video input.
Take your time. MONITOR TV Output The video output of the RSP-975 sends the video signal to your TV monitor from an RCA-type composite video connection. Simply connect the MONITOR TV output to a video input on your televi- sion monitor, using a standard RCA composite video cable.
All specifications are accurate at the time of printing. Rotel reserves the right to make improvements without notice. Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan. DTS is a registered trademark of Digital Theater Systems.
Page 16
North Reading, MA 01864-2699 Worthing, West Sussex BN11 2RX Phone: +44 (0)1903 524 813 Fax: +44 (0)1903 524 831 Phone: +49 05201-87170 082 OMRSP-975 020399 ENG The Rotel Co. Ltd. 10-10 Shinsen-Cho Shibuya-Ku Tokyo 150-0045 Japan Phone: +81 3-5458-5325 Fax: +81 3-5458-5310...