GE GLD8110 Technical Service Manual page 9

Start
GLD8110-GLD8312 Series
Close the dishwasher door and selected the cycle and options. Water fill begins immediately and
approximately 90 seconds later the wash action begins.
GLD9312 Series
Open the dishwasher door, After selecting the cycle and options, touch the
and then Water fill begin after approximately 10 seconds. Wash action begin approximately 90 seconds later
The dishwasher will always display your last selection and enhancements. If you don't want to change the
settings, simply touch the
Clean
Clean
The light is illuminated when the selected cycle and enhancements (not included Speed & Rinse&Hold
Cycle) are complete.
START/RESET
pad to ready the dishwasher and close the door to begin the cycle.
START/RESET
‐ 9 ‐
pad. Close the door