GE GLD8110 Technical Service Manual page 22

Display Does Not Work
Disconnect power to the dishwasher.
Access the control circuit board.
Remove and reseat the display connector.
Does the display work?
Replace the display.
Does the display work?
Keypad Does Not Work
Disconnect power to the dishwasher.
Access the control board.
Remove and reseat the keypad connector.
Does the keypad work or activate correct cycles?
No
Test the keypad.Does the keypad work?
No
Note: Carefully remove the keypad label. When replacing the keypad label, make sure the lights and pads align
properly with the membrane.
No
Start the test cycle
Replace the keypad
Test the keypad.Does the keypad work?
No
No
Replace the control
board
Replace the control board
‐ 22 ‐