Panasonic PT-60LCX64-K Operating Instructions Manual page 53

Adjustment
Button
item
Press ►
button.
H Position
Press ◄
button.
Press ►
button.
V Position
Press ◄
button.
Press OK
H Width
button.
Press ►
button.
V Size
Press ◄
button.
Press ►
button.
H Size
Press ◄
button.
Press ►
button.
Phase
Press ◄
button.
Color Press OK
Corr. button.
The OVER SCAN menu is added only when a 640 × 480 signal is input from the HDMI Input.
Adjustment
Button
item
Press OK
Overscan
button.
Adjusting screen position and size
Adjustment Details
The image moves to the right.
The image moves to the left.
The image moves up.
The image moves down.
If noise appears on the ends of the
image in Shrink, switch to Enlarge.
If noise appears on the ends of the
image in Widen, switch to Nar row.
Press to enlarge image vertically.
Press to shrink image ver ti cal ly.
Press to enlarge image horizontally.
Press to shrink image horizontally.
Adjust in order to remove any picture interference or contour
blurring which may occur in computer images.
With HDMI connection, depending on the signal, the picture may be
displayed with unnatural colours (as if red and blue are reversed).
Correct by setting the Color Corr. to Off. (Default is On.)
Overscan: ON
ASPECT
(Normal display.)
4:3 mode
(Widen)
FULL mode
(En large)
(Shrink)
(Widen) (Narrow)
Overscan: OFF
(Picture is displayed smaller so it will
fit on the screen.)
(Narrow)
Note
Only JUST
mode
Only 4:3 mode
(Except PC
input)
Only ZOOM
mode
RGB input
RGB input
HDMI input
53