Panasonic PT-60LCX64-K Operating Instructions Manual page 35

Channel and Program Tuning
Channel and Program tuning in digital television differs from conventional television. With DTV, many
programs can exist within a single 6 MHz channel. These channels behave as sub-channels within a single
channel. When tuning to a digital channel, the Projection Display will also tune to a program and will indicate
the channel and program in the on-screen Channel Banner display.
In order to select channels properly, Auto Scan must be performed (refer to pages 30-31).
Direct Tuning Method
Follow the procedure below to directly enter the channel number using the Remote
Control number keys.
Select analog channel
1
Press the number keys on the Remote Control to
enter the Channel number. Press OK.
The following is an example of tuning to channel 15.
Direct Tuning Example
2
Select digital channel
1
If tuning a digital channel and your channel contains
more than one program, press PROG and enter the
program (1, 2, 3 etc.) using the number keys. Press OK.
The following is an example of tuning to channel 15-1.
Direct Tuning Example
2
PROG
3
4
Step Action Channel Banner Display
1 Press 1
2 Press 5
3 Press OK
Step Action Channel Banner Display
1 Press 1
2 Press 5
3 Press -
4 Press 1
5 Press OK
Projection display operation
1
15
15
1
15
15-
15-1
15-1
35