Warning Indicators; Cleaning - Panasonic PT-60LCX64-K Operating Instructions Manual

Warning Indicators

This unit has indicators (lights on the front) to let you know the unit's internal condition. (See page 12.)
Depending on the condition, the Lamp, Power, or Temp indicator will flash to alert you. In this case, turn unit off and
follow the measures below.
Indicator
Flashes red 1 or 3 times every
5 seconds.
Flashes red 2 or 4 times every
5 seconds.
Flashes red 5 times every
5 seconds.
Lights solid red.
Flashes red 1 time every
5 seconds.
Flashes red 2 times every
5 seconds.
Flashes red 3 times every
5 seconds.
Flashes red 4 times every
5 seconds.
Flashes orange 1 time every
5 seconds.
Flashes orange 2 times every
5 seconds.
Note:
If unit power is turned back on after performing the appropriate measures, make sure the unit has sufficiently cooled down. If the
unit was used for a long period such that the lamp needs enough time to cool down, this may take a while.
Clean ing
To ensure continued excellent performance from this product, periodic cleaning is
recommended.
100
Symptom
Power shuts off.
Power shuts off.
Power shuts off.
OSD appears every time
power is turned on.
Power shuts off.
Power shuts off.
Power shuts off.
Power shuts off.
Power shuts off.
Power shuts off.
The unit contains many
plastic parts. For this reason
DO NOT use benzine,
thinner or other chemicals to
clean the unit.
DO NOT bring into contact
with insecticide or other
volatile substances. DO
NOT allow the unit to come
into contact for extended
periods with rubber or vinyl
products.
Problem
Malfunction Contact servicentre.
Wait a while, then turn unit back
Internal overheat error.
on.
Malfunction Contact servicentre.
Maximum Lamp life hours
Replace Lamp
exceeded.
Try turning Power On several
Lamp will not light or light is
times. If error persists, contact
abnormal.
servicentre.
Lamp voltage is abnormal. Contact servicentre.
Lamp temperature is too
Contact servicentre.
high.
Other error. Contact servicentre.
The internal cooling fan is not
Contact servicentre.
working.
The Lamp Cover is
Securely attach Lamp Cover.
unsecured.
Dust will accumulate on the picture
screen. Please wipe with a soft
cloth from time to time. If you use a
chemically treated cloth, please be
careful to follow the instructions that
come with the cloth.
Remove dirt and soiling by wiping
with a light cloth. Even if the unit is
heavily soiled, do not apply cleaner
directly to the unit. Soak a cloth in a
solution of neutral cleanser diluted
with water. Then wring out the cloth,
wipe the unit clean, and finish by
wiping with a dry cloth. Do not use
any type of cleansers on the picture
screen.
Possible Solution