Aspect Controls - Panasonic PT-60LCX64-K Operating Instructions Manual

ASPECT Con trols
The colour monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen
cinema format picture.
Notes:
• However, if the mode selected does not match the aspect ratio of the input signal, the original picture quality may be affected.
• If using this Projection Display in places, such as cafes or hotels, with the aim of displaying programs for a commercial purpose
or for public presentation, please note that by using the aspect ratio (16:9) selection function to change the aspect ratio, you
may be infringing on the rights of the original copyright owner of that program under copyright protection laws.
• If a 4:3 picture is projected in wide screen, distortion may occur around the edges so that part of the picture may no longer be
visible. We recommend viewing in 4:3 mode so you can enjoy the picture as it was intended to be seen.
40
The aspect mode changes each time ASPECT is
pressed.
JUST
4:3
• When a 480p signal is being received, the mode
switches between 4:3, ZOOM, and FULL only.
4:3
• During PC input, the mode switches between 4:3, FULL and TRUE only.
4:3
• When XGA and Mac 19 signal is input, the aspect will be 4:3 and FULL only.
4:3
Notes:
• When a 1080i or 720p signal is being received, the mode is set to FULL, and
aspect switching is not possible.
• When input mode is CARD, the mode is set to 4:3, and aspect switching is
not possible.
ZOOM
FULL
FULL
ZOOM FULL
FULL TRUE
FULL