Panasonic PT-60LCX64-K Operating Instructions Manual page 31

5
Press to start
Auto Scan.
Notes:
• If Cable Only, Antenna Only or Antenna/Cable is selected and DCM (Digital Cable Module) is not in, the Auto Scan
will perform Scan All.
• If Cable Only is selected and DCM is in, Auto scan will be skipped.
• If Cable/Antenna is selected and DCM is in, Antenna (B) Analog & Digital Auto scan will be performed.
Auto Scan - To automatically Scan All available channels, Antenna (A) Analog, Antenna (A) Analog & Digital,
Antenna (B) Analog and Antenna (B) Analog & Digital.
1
Select Auto Scan and press OK to enter
the sub menu.
2
Press to select
Auto Scan item.
3
Press to start
Auto Scan.
EXIT
4
Press to exit menu.
Notes:
• Some channels with very weak signals may be locked into memory. If desired, these channels can be deleted man u al ly using
the Manual Program feature.
• Auto scan must be done when you select the input signal for the first time or whenever you change the antenna configuration.
Tuning channels
P r o g r a m C h a n n e l
I n p u t S e t u p Scan All
Antenna (A) Analog
A u t o S c a n
Antenna (A) Analog & Digital
M a n u a l P r o g r a m
Antenna (B) Analog
Antenna (B) Analog & Digital
S i g n a l M e t e r
L a n g u a g e
31