Table of Contents
Advertisement
Parts Names
1 microUSB connector
2 Earphone jack
3 Notification LED
4 Proximity sensor
* The display may be dark
during calls if this sensor is
covered. Do not put labels
or stickers on the sensor.
5 Earpiece (receiver)
6 Sub camera
7 Display (Touch panel)
8 Mouthpiece /
microphone
9 Front keys
(menu) key
(home) key
(back) key
(search) key
10 Main camera
11 Speaker
12 Back cover
13 SIM slot
14 Antenna sensor
* For the best performance,
do not cover these areas by
your finger, etc. when using
this product.
15 microSD card slot
16 Power switch
17 Strap slot
18 ▲ / ▼ (volume) keys
Getting Started
1
2
3 4
5 6 7
8
9
10
11
12
13
14
15
16
17
18
Removing / Attaching
the Back Cover
To remove the back cover, hook your finger on the slot
and remove in the direction shown, without too much
force.
To attach the back cover, insert the tabs in the slots as
shown below and push down the back cover securely in
the direction shown.
Securely push the areas shown by arrows and make sure
that there is no gap between the back cover and this
product.
Note
• When attaching the back cover, make sure that the SIM card,
the microSD card, and the battery pack are attached
securely. If the SIM card or microSD card is not securely
inserted, the battery pack will sit on the SIM or microSD card
and create a gap between this product and the back cover
when attaching the back cover.
14
Advertisement
Table of Contents
