Table of Contents
Advertisement
Parts Names
1 Power switch
2 microUSB connector
3 Proximity / Illuminance
sensor
* The display may be dark
during calls if this sensor is
covered. Do not put labels or
stickers on the sensor.
4 Notification LED
5 Earpiece (receiver)
6 Display (Touch panel)
7 Mouthpiece /
microphone
8 Front keys
(menu) key
(home) key
(back) key
(search) key
9 Speaker
10 Camera
11 Light
12 + / - (volume) keys
13 Sub-microphone
14 microSD card slot
15 Antenna sensor
* For the best performance,
do not cover these areas by
your finger, etc. when using
this product.
16 Back cover
17 SIM slot
18 Strap slot
Getting Started
1
2
3
4 5
6
7
8
9
10
11 12
13
14
15
16 17
18
Removing / Attaching
the Back Cover
To remove the back cover, hook your finger in the slot
and remove in the direction shown, without too much
force.
To attach the back cover, insert the tabs on top of the
back cover into the slots, slide it in the direction shown,
and push it down securely in the direction shown.
Securely push the areas illustrated by the dots and make
sure that there is no space between the back cover and
this product.
Notes
• When removing the back cover, make sure that you remove
water and wipe moisture off this product.
• When attaching the back cover, make sure that no dust or dirt
adheres to the back cover (especially to the rubber packing).
• Water might enter the inside of this product unless you attach
the back cover securely.
• When attaching the back cover, make sure that the SIM card,
the microSD card, and the battery pack are attached
securely. If the SIM card or microSD card is not securely
inserted, the battery pack will sit on the SIM or microSD card
and create a gap between this product and the back cover
when attaching the back cover. The waterproof functionality
of the product might be lost as a result.
16
Advertisement
Table of Contents
