Table of Contents
Advertisement
Getting Started
Preparing the phone
Before trying to use your phone, make sure that a valid Subscriber Identity Module (SIM) card is inserted and the battery is charged.
SIM card
Before using your phone, you must sign-up with one of the digital network service providers. In addition to your subscription details you will receive a
personal SIM (Subscriber Identity Module) card which is inserted into your phone.
If the SIM card is removed, the phone becomes unusable until a valid SIM card is fitted. It is possible to transfer your SIM card to another compatible
phone and resume your network subscription. The screen on your phone will display appropriate messages if no SIM card is fitted.
If the phone, or the SIM card, is lost or stolen then you should contact your service provider immediately in order to bar it from use.
The phone supports a number of languages and the keyboard symbols have been chosen for world-wide operation.
The digital technology of your phone helps to ensure that your conversations are kept secure.
The SIM card contains personal data such as your electronic phonebook, messages (see "Message (M2)" on page 29) and also details of the network
services you have subscribed to. The phone will not work (except for emergency calls on some networks) unless a valid SIM card is fitted.
Be sure to turn the phone off before inserting and removing a SIM card. Otherwise damage to the SIM card can occur.
If you remove the SIM card while the phone is turned on, the phone will restart itself.
Inserting a SIM card
Be sure to turn the phone off before inserting a SIM card.
☛
Pick up the bump and lift the SIM card compartment cover gently in the direction of the arrow (STEP 1).
Be careful not to pull out the cover too much. This may cause the SIM card compartment cover
to break apart.
Make sure to handle the black rubber part that connects the phone and the SIM card
compartment cover gently.
☛
Insert the SIM card into the narrow slot in the SIM card compartment in the direction of the arrow
(STEP 2) until it is locked in place (STEP 3). Make sure the metal part of the SIM card is facing front
when viewed from the keypad (see the figure on the right).
Be careful not to damage electric parts of the SIM card compartment when inserting a SIM
card.
If the SIM card is not fully inserted, damage to the SIM card can occur.
☛
Slide the cover in the direction of the arrows (STEP 4) until the two tabs fit properly inside the cover (STEP 5).
☛
Close the cover in the direction of the arrows until the four tabs are locked in the cavities and click (STEP 5 and STEP 6).
If the SIM card is already fitted, see "Start-up" on page 5.
Metal part
SIM card
1
Getting Started
Advertisement
Table of Contents
