Table of Contents
Advertisement
Connecting to a VPN
A VPN (Virtual Private Network) is a technology allowing
a connection externally to information on a protected
local network, such as in a corporation or university.
When configuring VPN connection from this product,
obtain security information from the network
administrator.
Adding a VPN
1
From the "Settings" screen, tap "More..."
"VPN".
2
Tap "OK"
set a lock screen PIN or password.
3
Tap "Add VPN network"
4
Follow the administrator's instructions to
configure each item of the VPN setting.
5
Tap "Save".
Connecting to a VPN
1
From the "Settings" screen, tap "More..."
"VPN".
2
Tap the VPN to connect.
3
Enter the required information
■
Disconnecting from a VPN
Open the Notifications panel and tap the notification for
the VPN connection
the connected VPN.
the VPN type to add.
"Connect".
Security Code
Some features require security codes to make various
functions more convenient. These include a password for
locking this product and a network security code for
network services. By using different codes for different
purposes, you can get the most out of this product.
Precautions for all security codes
Avoid setting security codes using your birthday, part of
your phone number, your address or room number,
"1111" or "1234" that can be easily guessed by others.
Be sure to write down the security codes and store them
in a safe location.
PIN1 code / PIN2 code
The SIM card has two settable security codes, PIN1 code
and PIN2 code.
PIN1 code is a 4- to 8-digit number (code) that is entered
to confirm the user when the SIM card is inserted in this
product, or when the product power is turned on. It is
intended to prevent unauthorized use. Entering PIN1
code makes the product operable.
PIN2 code is a 4- to 8-digit number required when using
the user certificate, such as when requesting issue.
Note
• In general, if you enter the incorrect PIN1 / PIN2 code 3 times
consecutively, the PIN1 / PIN2 code is locked. Unlock using
PUK code.
However, note that the number of times you are allowed to
enter the incorrect codes depends on the SIM card type.
Enabling the SIM's PIN
Set to require entry of the PIN1 code when the power is
turned on.
1
From the "Settings" screen, tap "Security"
up SIM card lock".
2
Check the box of "Lock SIM card" enter the PIN1
code
"OK".
■
Changing the PIN1 code
After step 1, tap "Change SIM PIN"
PIN1 code
"OK"
enter the new PIN1 code again
49
enter the current
enter the new PIN1 code
"OK".
Settings
"Set
"OK"
Advertisement
Table of Contents
