Related Manuals for IOGear GWHD11
Summary of Contents for IOGear GWHD11
- Page 1 Quick Start Guide Wireless HDMI Transmitter and Receiver Kit GWHD11 PART NO. Q1292 www.iogear.com...
-
Page 2: Package Contents
Package Contents 2 x AAA Battery 1 x Wireless HDMI Transmitter 1 x HDMI Cable 1 x Wireless HDMI Receiver 1 x Quick Start Guide 1 x Mini USB to USB Cable 1 x Warranty Card 2 x USB Power Adapter 1 x Remote Control System Requirements Display:... - Page 3 Wireless HDMI Receiver: 1. Power Button with LED Indicator: - Lights green when powered on - Lights red when in Standby Mode 2. Source Button 3. Video Status LED - Off when in Standby Mode - Blinks at initial boot up / warm up (15~20 seconds) - When in wireless linked mode: a.
-
Page 4: Hardware Installation
Hardware Installation Step 1: Setup the Wireless HDMI Transmitter 1. Connect the Wireless HDMI Transmitter to the HDMI port of the computer or media source. 2. Power the transmitter through one of two options: a. If used with a Blu-Ray player or similar device, connect the Wireless HDMI Transmitter to the USB power adapter. - Page 5 Pairing Additional Transmitters The Wireless HDMI Receiver can be paired with up to 3 additional Wireless HDMI Transmitters (Part #GWHDSTX sold separately). Please visit http://www.iogear.com/product/GWHDSTX/ for more information. Note: When adding an additional transmitter, make sure the power to any transmitters already linked to the receiver is powered off before entering the receiver into pairing mode.
- Page 6 Transmitter No. button on the Remote Control. 2. The On-screen Display (OSD) Select Transmitter Number: will appear on the HDTV / HD → GWHD11 projector. Use the UP or DOWN buttons to select SETUP menu. SETUP 3. Select Add New Transmitter...
- Page 7 To exit Searching Mode, press the Transmitter No. button on the remote control. 4. When both the transmitter and Adding GWHD11... receiver are in Pairing Mode, they will search for each other and automatically pair. 5. After the pairing is complete, both the transmitter and receiver will re-boot and establish the link to each other automatically within 5 seconds.
- Page 8 If more than one transmitter is linked to the receiver, use the following steps below to modify a transmitter’s name: 1. Press Transmitter No. to display the list of linked transmitters. Select Transmitter Number: → GWHD11 → GWHDSTX SETUP 2. Select SETUP menu by using the Up / Down buttons;...
- Page 9 4. Use the Up / Down buttons to select the transmitter you want to modify. Edit Transmitter name: → GWHD11 → GWHDSTX Return 5. Then use the Up / Down buttons on the remote to select alphanumeric characters; use the Left / Right buttons on the remote to move the cursor;...
- Page 10 Removing a Paired Transmitter 1. Press Transmitter No. to display the list of linked transmitters. Select Transmitter Number: → GWHD11 → GWHDSTX SETUP 2. Select SETUP menu by using the Up / Down buttons; press OK to select. Select Transmitter Number: →...
-
Page 11: Fcc Statement
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential setting. This product generates, uses, and can radiate radio frequency energy and, if not installed and used as directed, it may cause harmful interference to radio communications. -
Page 12: Limited Warranty
WE’RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP THIS PRODUCT? Make sure you: 1. Visit www.iogear.com for more product information 2. Visit www.iogear.com/support for live help and product support Warranty Information This product carries a 1 Year Limited Warranty. For the terms and conditions of this warranty, please go to http://www.iogear.com/support/warranty...
Need help?
Do you have a question about the GWHD11 and is the answer not in the manual?
Questions and answers