JVC GET0602-001A Instruction Manual page 18

Menu item
External Input *
Beep
Telephone Muting *
Illumination
Motion Sensitiv.
Initialize
* 13
Not required for Bluetooth, Satellite radio interface, and XMDirect™ Tuner Box. They are automatically detected.
* 14
Not selectable when the component connected to the CD changer jack is selected as the source.
* 15
The name of the component detected through the CD changer jack is shown.
* 16
The TEL MUTING lead connection is required. See Installation/Connection Manual.
18
13, * 14
For connecting an external component to the CD changer jack on the rear.
♦
Changer/iPod *
♦
External
♦
Off
♦
On
♦
16
Off
♦
Muting1,
Muting2
You can turn off the screen and the light of the buttons on the monitor panel
while turning on the unit. (
Normal:
Proximity/Motion: Lights up when your
Proxi/Motion-LCD:
Touch Panel:
Touch Panel-LCD:
Change the sensitivity of the sensor for <
♦
Low, Mid, High
Initialize all settings you have made in <AV Menu>. Press and hold [Enter]
to initialize the settings, then reset the unit. (
Selectable setting/item
15
: CD changer, ( 41), iPod, (
: Any other than the above, (
: Cancels.
: Activates the key-touch tone.
: Cancels.
: Select either one which mutes the sounds while
using the cellular phone.
7)
Buttons on the
monitor panel
Always lights.
hand moves close to
the buttons.
Lights up when your
hand moves close to
the buttons.
Lights up when your
finger touches the
buttons or touch panel.
Lights up when your
finger touches the
buttons or touch panel.
Illumination
45).
48).
Screen
Always lights.
Always lights.
Lights up when your
hand moves close to
the buttons.
Always lights.
Lights up when your
finger touches the
buttons or touch panel.
> above.
3)