• Press the base firmly into the
vehicle seat while removing all
slack from first the lap portion
and then the shoulder portion
of the vehicle seat belt.
• Hold the vehicle belt tight and
close the upper portion of the
lock-off.
• Press firmly on the upper
portion of the lock-off and
close the lower portion to
secure.
• Verify that the vehicle belt is tight and that the base is secure.
The base is secure when it moves less than 1 inch (2.5 cm)
front-to-back or side-to-side at the vehicle belt path.
• Correct recline angle is acheived when the green marker on
each recline angle indicator is visible between the two lines.
Installing the Base
17