Table of Contents
Advertisement
INTRODUCTION
Using the Receiver Button to Access Iwatsu
System Features
By performing a hook switch flash (quickly pressing
and releasing the Receiver Button) and dialing the
desired Feature Operation Code, you can easily
access ADIX or Enterprise-CS features.
Each feature operation code must be programmed
in the ADIX or Enterprise-CS database by your
system installer. Space is provided on the inside
back cover of this guide to write your feature
operation codes for quick reference. Check with
your
telephone
system
administrator
encounter problems accessing any of the features
described in this guide.
BASIC FEATURES
Making An Outgoing Call
• Lift the receiver
• Dial the outside line access code*
• When you hear the dial tone, dial the telephone
number
Make a Dialing Mistake?
• Hang up
• Dial again
Receiving An Incoming Call
When your phone rings:
• Lift the receiver to connect the call
Transferring A Call To Another Extension
When speaking on an outside line:
• Quickly
press
and
release
button
• When you hear the tone dial the extension
number
• Announce
the
call
when
answers
• Hang up the receiver
The call is automatically transferred.
* All access codes are programmed by the
system administrator.
1
ECS_SLT_QRG_7.06.05
pages 2 and 15
NOTES:
if
you
the
receiver
the
extension
14
Thursday, July 21, 2005 09:35
Composite
Advertisement
Table of Contents
