Mach TX112 mk II User Manual

Tx series

TX Series

user manual

Table of Contents

Need help?

Do you have a question about the TX112 mk II and is the answer not in the manual?

Page 1 TX Series user manual...
Page 2 © 2000 Martin Professional A/S, Denmark. All rights reserved. No part of this manual may be reproduced, in any form or by any means, without permission in writing from Martin Professional A/S, Denmark. Printed in Denmark.
Page 3 E S I G N C O N C E P T The TX line from Mach is a complete series of professional speakers that borrows may design features from the larger Mach speakers. The speakers in the TX line deliver clean, loud, and dynamic sound in a rugged, easy to handle package.
Page 4 To fly the speaker, simply remove the M10 bolts in the top and rear and replace them with the genuine Mach M10 eyebolts (P/N 93940002), which have a certified load of 4 tons. O R N...
Page 5 If this happens, the compression driver has reached its maximum power handling level. Do not increase the high frequency level on the EQ or the tone control on the mixer. This may damage the compression driver. If higher output is required, more or larger speakers are required. When volume is decreased and current returns to a safe level, the protection circuit automatically restores full signal to the horn, and the audio output returns to normal.
Page 6 P E C I F I C A T I O N S TX112 mk II TX12F TX15F TX215F TXS18 Woofer 12” 12” 15” 2x15” 18" Compression 1” 1” 1” 1” driver Power 200 watt 250 watt 350 watt 500 watt...

Tx12fTx15fTx215fTxs18Tx series