Cables/plugs How to connect audio cables and plugs On the following pages you will find information about how to hook up your M-Flex speakers. To save time and a lot of sweat and tears please follow these instructions carefully. Before you start make sure that all cables are without damages and the plugs are clean and dry.
Signal In CAUTION: Mic. Do not open Line this producor Line 2 expose this system to rain or Power moisture to reduce the risk of fire or Line 1 Input Section M·FLEX Mach On-board DSP tecnology MARTIN Professional Product...
Power moisture to reduce the risk of fire or Line 1 Input Section M·FLEX Mach On-board DSP tecnology 230V Keyboard By using a TS (TRS) plug you connect Output Adjust Master your instrument either to Line 1 or if you...
Line 1 Line 1 Input Section Input Section M·FLEX Mach M·FLEX Mach On-board DSP tecnology On-board DSP tecnology 230V 230V How to use two or more M•Flex speakers with a mixer The M-Flex is highly flexible and can therefore be combined with all other M-Flex products.
Page 7
Line 1 Line 1 Input Section Input Section M·FLEX Mach M·FLEX Mach On-board DSP tecnology On-board DSP tecnology Line 1 Line 1 Stereo setup with either four M•Flex 12 or four M•Flex 15 and a mixer...
Need help?
Do you have a question about the M Flex 12 and is the answer not in the manual?
Questions and answers