Honda Vehicle Owner's Manual page 56

06/10/30 16:49:08 32SJD620_056
2. Route the belt through the
restraint according to the restraint
system maker's instructions, then
insert the latch plate into the
buckle.
3. To activate the lockable retractor,
slowly pull the shoulder part of the
belt all the way out until it stops.
Installing a Child Restraint System
4. Push down the tab. Route the
shoulder part of the belt into the
slit at the side of the restraint,
then let the belt feed back into the
retractor.
5. After the belt has retracted, tug on
it. If the belt is locked, you will not
be able to pull it out. If you can pull
the belt out, it is not locked, and
you will need to repeat these steps.
Driver and Passenger Safety
CONTINUED
53