Honda Vehicle Owner's Manual page 268

06/10/30 17:18:20 32SJD620_268
SOCKET
2. Remove the socket from the light
assembly by turning it one-quarter
turn anticlockwise.
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
4. Test the lights to make sure the
new bulb is working.
5. Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
6. Reinstall the high-mount brake
light assembly into the tailgate.
Tighten the two screws and
reinstall the covers.
BULB
Lights
Replacing a Rear Licence Plate
Bulb
1. Open the tailgate. Place a cloth on
the edge of the cover. Remove it
by carefully prying in the notch on
its middle edge with a small flat-
tipped screwdriver.
CONTINUED
Maintenance
265