Honda Vehicle Owner's Manual page 276

06/10/30 17:19:27 32SJD620_276
BLADE
To replace a rear wiper blade:
1. Raise the wiper arm off the
windscreen.
2. Remove the blade from its holder
by grasping the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
BLADE
REINFORCEMENT
Examine the new wiper blades. If
3.
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Wiper Blades
4. Slide the new wiper blade into the
holder until the tabs lock.
5. Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
6. Lower the wiper arm.
Maintenance
273